China Deep Sea Auto Start Control Module Dse560

DSE560 Auto Start Control Module
The Model 560 is an Automatic Engine Control Module. The module is used to automatically start and stop the engine and indicate operational status and fault conditions. It will automatically shut down the engine and indicate the engine failure by means of a graphical LCD display and a flashing LED on the front panel.
Operation of the module is via a threeposition, rotary switch (key-switch option available) mounted on the front panel with STOP, AUTO and MANUAL positions.
The module features microprocessor control and provides a comprehensive list of timers and pre-configured sequences. This allows complex specifications to be realised. Selected operational sequences, timers and alarms can be altered by the customer. Configuration changes to the system are made by using the 808 interface and a PC. This interface also provides real time diagnostic facilities.
Main features
Micro-processor based design
Automatic engine starting and topping
Automatic shutdown on fault condition
Custom graphical icon LCD display
PC configurable via MS Windows™ based software
Provides engine instrumentation
Provides generator output instrumentation
Provides alarm and status Information
Simple selector switch controlled operation
Real time diagnostics via MS Windows™
Configurable digital inputs
Configurable relay outputs
Configurable timer settings
Configurable alarm trip points
Expansion modules for further enhancement
External remote start input
LED & LCD alarm indication
Adjustable crank cycle/attempts
In-built logic for smoke limit control
Specification
DC SUPPLY
ConTINUOUS VOLTAGE RATING
8 to 35 V Continuous.
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
MAXIMUM OPERATING CURRENT
390mA at 12 V. 250mA at 24 V. =
MAXIMUM STANDBY CURRENT
220mA at 12 V. 120mA at 24 V.
CHARGE FAIL / EXCITATION RANGE
0 V to 35 V
INPUTS
ALTERNATOR INPUT RANGE
15 V(pH-N) to 277 V(pH-N) 3 Phase 4wire AC (+20%)
ALTERNATOR INPUT FREQUENCY
50 - 60 Hz at rated engine speed (Minimum: 15V AC pH-N)
MAGNETIC PICK-UP VOLTAGE INPUT RANGE
+/- 0.5 V to 70 V Peak
MAGNETIC INPUT FREQUENCY
10, 000 Hz (max) at rated engine speed.
OUTPUTS
START RELAY OUTPUT
16 AMP DC at supply voltage.
FUEL RELAY OUTPUT
16 AMP DC at supply voltage.
AUXILLIARY RELAY OUTPUTS
5 AMP DC at supply voltage.
We aslo supply other DEEPSEA parts as the following.
DSE Ultra Series
DSE3210, DSE3110, DSE6010, DSE6110, DSE6120, DSE6020, DSE4420, DSE501, DSE4410, DSE4130, DSE4110, DSE4120, DSE4420(3-phase), DSE4410(3-phase), DSE720, DSE710, DSE705, DSE704, DSE703, DSE702, DSE701
DSEMarine Series
DSE5510M, DSE5310M
DSEControl Series
DSE7320, DSE7310, DSE7220, DSE7210, DSE7120, DSE7110, DSE5320, DSE5310, DSE5220, DSE5210, DSE5120, DSE5110
DSEPower Series
DSE8620, DSE8003, DSE7570, DSE8680, DSE7271$DSE871X, DSE8610, DSE8700, DSE7560, DSE8660, DSE7510, DSE7520, DSE5520, DSE5560, DSE850, DSE5510
DSEExtra SERIES
DSE813, DSE125, DSE123, DSE124, DSE130, DSE157, DSE160, DSE548, DSE549, DSE810, DSE860, DSE865, DSE9255, DSE9155, DSE9150, DSE9130, DSE9140, DSE9260
DSENet SERIES
DSE2548, DSE2520, DSE2510, DSE2157, DSE2130
DSEATS SERIES
DSE335, DSE334, DSE331, DSE330, DSE333, DSE332
OTHERS
DSE8810, DSE7420, DSE7410, DSE2152, DSE2133, DSE2131, DSE402-MKII, DSE820, DSE808, DSE560, DSE557, DSE556, DSE541, DSE521, DSE520, DSE500, DSE402, DSE103