China Dehumidifying Dryer Industrial Drying Machine Drying Machine

50m3/Hr Plastic Loader Industrial Drying Machine Dehumidifying DryerProduct Specification:SCD series dehumidifying and drying feeding combination integrates three functions of dehumidification, drying, and two-stage feeding.Widely used in various plastic materials, especially engineering plastics with strong hygroscopicity,Such as PA, PC, PBT, PET, etc.The dew point of the SCD-H type is also ideally as low as -40°C.This series of products uses the TD-H series of honeycomb dehumidifier dehumidifiers together with down-blowing stainless steel European insulation barrels.The entire series adopts P.I.D. temperature control system as standard equipment.Another PLC control with LCD touch man-machine interface for purchase,Dew point meter and automatic filling machine are optional.
ParametersSCD-80U/50H microcomputer controHeat preservation barrel capacity80L (50KG can be loaded when the specific gravity of raw material is 0.65)Drying electric heating power3.9KWDrying fan power0.4KWDehumidification volume50m3/hrRegeneration power3.0KWRegenerative fan power0.2KWFeed fan power0.75KWSuction machine piping1.5"*14M (tube bundle 1.5"*6)Europeanized electric eye hopperSHR-6U-E*1Europeanized vacuum hopperSHR-6U*1Suction white iron tube1.5"*1Circuit boardTaiwan Hong YunMain power switchSchneider, FranceSolenoid valveTaiwan Yade Ke
Features:
• The TCD dehumidifying and drying feeding assembly is equipped with a honeycomb runner, and a low dew point dry air with good stability can be obtained. The shaLED Module pe is divided into two types: semiPrinting Materials -open type and fully closed type.
• Suitable for engineering plastic materials with strong hygroscopicity such as: PA, PC, PBT, PET, etc.;
• Integrate three functions of dehumidification, drying and two-stage feeding, and select three-stage feeding function;
• Insulation drying drum adopts the design of the lower blowpipe and the cyclone exhaust device to prevent the loss of heat energy, ensure the temperature and improve the drying efficiency;
• All machines are equipped with a circuit-closed feeding system to prevent dried materials from getting wet again due to contact with the outside air;
• The double dehumidifier system uses a double cooler structure to ensure a lower return air temperature and dew point;
• The feeding system is equipped with a cutting valve to ensure thatNon Woven Bag there is no residual material in the feed tube;
mold temperature machineFeature :
1.Combine the function of dehumidifying, drying and two-stage conveying into single unit.
2.Plastic Dryers are equipped with honeycomb rotor to obtain stable low dew-point drying air.
3.Feeding system of plastic dryer is equipped with shut-off valve to ensure no surplus raw material in hopper tubes.
4.Microprocessor is one of the standard equipment.
5. Material contact surface are all mirror polished and collocates conveying system with closed loop to avoid contamination and moisture regain.
6. Heat preserved drying hopper barrel adopts down blow pipe design and collocates with cyclone air exhaust to avoid heat lost and improve drying efficiency.
7.This dehumidifying series adopt double cooler structure to ensure lower return air temperature and dew-point value.
8. PLC control and touch Screen are optional, making operation convenient for machine's automatic running.
9.Dew-point monitor is optional to monitor dew-point value at all times.
Product Details:
Our Company:Dongguan Yubang Precision Machinery Co., Ltd.Since its inception, the company serves all major manufacturers in the Pearl River Delta and enjoys a certain reputation in the industry. The company has registered the YUSHINE trademark and many patents and has maintained a steady and sustainable development. Now the products are sold to various domestic provinces and cities and overseas marketsTo "professional to provide you with plastic injection molding machine auxiliary machine repair parts one-stop purchase," the company's goal
In-depth to provide customers with professional solutions, the central feeding system (centralized feeding system) project, plastic workshop circulating water or ice water systems engineering, mold thermostat and installation of cooling projects, and customers can tailor-made sections Non-standard equipment
Certification:FAQ:1. Q: How To Order ?
A: Step 1, please tell us what model and quantity you need;
Step 2, then we will make a PI for you to confirm the order details;
Step 3, when we confirmed everything, can arrange the payment;
Step 4, finally we deliver the goods within the stipulated time.2 . Q: When will make delivery ?Fire Control
A: Delivery Time
-Sample Order: 1-3 days after receipt of the full payment.
-Stock Order: 3-7days after receipt of the full payment
-OEM Order: 12-20days after receipt of the deposit.3. After-sales Service
1 year warranty for all kinds of products;
If you find any defective accessories first time, we will give you the new parts for free to replace in the next order, as an experienced manufacturer, you can rest assured of thePetroleum Equipment & Machinery quality and after-sales service.4.Payment
T/T, L/C at sight,West Union.5. Transportation
Transported by DHL, UPS, EMS, Fedex,Air freight. sea freight.6. Do you support drop shipping?
Yes,your drop shipping is available.