China Design Construction Building Structural Steel Workhouse Shed

Technical Parameter of standard prefabricated steel house:
(1). Wind resistance: Grade 11(wind speed≤ 120km/h).
(2). Earthquake resistance: Grade 7.
(3). Live load capacity of roofing: 0.6kn/m2.
(4). External and internal wall heat transmission coefficient: 0.35Kcal/m2hc.
(5). Second Floor Load Capacity: 150 kg/m2
(6). Live load of corridor is 2.0kn/ m2
(7). Wall permitted loading: 0.6KN/ m2
(8). Ceiling Permitted live loading: 0.5 KN/m2
(9). Wall Coefficient of thermal conductivity: K=0.442W/m2k.
(10). Ceiling Coefficient of thermal conductivity: K=0.55W/ m2K
MAIN STEEL PART of Steel Workshop
1. H section steel columns, beams and wind-proof columns.
2. With treatment of one time red-oxide primer painting and two times grey facing painting.
ROOF & WALL CLADDING
1. Roof & Wall Corrugated Single Steel Sheet: 0.3mm-0.6mm
2. Roof & Wall Sandwich Panel Insulated with EPS Foam, Glass wool, Rock wool and PU: 50mm-150mm
3. Transparent Sheet (FRP): 1.0mm-2.0mm
4. Flashings: Made by Color-coated Corrugated Steel Sheet
WINDOW & DOOR
1. Window: PVC Window or Aluminum-alloy Window
2. Door: Sliding Door or Roll-up Door
FASTENERS
High-strength Bolt; Common Bolt and Nut; Self-tapping Screws; Foundation Bolt and Nut, ETC
OTHER OPTIonAL ACCESSORIES
1. Gutter
2. Downpipe
3. Brick Wall: The height of brick wall is depended on client's need
4. Ventilation System
5. Lifting Height of Crane: >6m.
6. Lifting Weight of Crane: 3-30T

Material List For Prefabricated HouseMain Steel frameSteel columnFabricated by Q235 or Q345 Steel,80*80 or 100*100 or 120*120 or 150*150 Square Tube, alkyd paiting, two primary painting, two finish painting.Triangular Steel structure roofFabricated by Q235 or Q345 Steel, C80, C100, C120, C140 Section steel, alkyd paiting, two primary painting, two finish painting.Roof PurlinFabricated by Q235 Steel, C80, C100, C120, C140 Section steel, alkyd paiting, two primary painting, two finish painting.Ordinary bolt4.8S, GalvanizedRoof and Wall Roof PanelA: Insulated Steel Sandwich Panel wall
(1) Panel width: 950mm;
(2) Thickness: 50-1200mm.
(3) Powder coated Color steel on both sides: 0.4mm/0.5mm/0.6mm
B: Insulation: Polystyrene, Rockwool, Fiber Glass or Polyurethane
(1) Density of Rockwool: 120Kg/m3
(2) Density of Polystyrene: 12Kg/m3, 16KG/M3 20KG/M3
(3) Density of Polyurethane: 40Kg/m3
(4) Density of Fiber Glass:40Kg/m3, 60Kg/m3Wall PanelA: Insulated Steel Sandwich Panel wall
(1) Panel width: 950mm;
(2) Thickness: 50-1200mm.
(3) Powder coated Color steel on both sides: 0.4mm/0.5mm/0.6mm
B: Insulation: Polystyrene, Rockwool, Fiber Glass or Polyurethane
(1) Density of Rockwool: 120Kg/m3
(2) Density of Polystyrene: 12Kg/m3, 16KG/M3 20KG/M3
(3) Density of Polyurethane: 40Kg/m3
(4) Density of Fiber Glass:40Kg/m3, 60Kg/m3Edge Cover0.4mm galvanized color steel , angle Alu.Fasteners & AccessoreisNailsglue ectCeiling&FlooringCeiling6mm gypsum board,with steel keelPlywood18mm film faced plywoodFloor feather 1.5mm PVC floor leatherDoor and windowDoor (1) External door: Single open door. Insulated with opening dimension 950*2100mm, furnished with lock with 3keys.
(2) Inner door: Single open door. Insulated steel door.Window4mm glass PVC window witn flying screemElectrical SystemElectric Cable(1) Three diferent color.
(2) Lighting: 2.5m m2.
(3) Air condition: 4.0mm2
(4) BV cable, solid corePVC Wire ChannelPVC wire channelLights Double tube fluorescent lamp, 220V,50-60HZSwitchesSingle Switch, with junction box Socket16A five hole univesal socket.Power Distribution CabinetBox+breakers+earth leakage protective device Water&Plumbing system(choose)Water drain pipe(1) PPR pipe, dim 16-20mm, connection fittings are made of copper, life span over 10 years.
(2) Exhaust fan or air exchange hole, size 250mm*250mm made of steel or PVCSanitary ware(1) Western Close tool: ceramic, with pipes and installation fittings
(2) Urinal: ceramic, with pipes and installation fittings
(3) Wash basin: ceramic, with post, faucet, pipes and installation fittings
(4) Shower head, Shower base, Water mixturePlumbing System and Rain Water Drainage System as per building design

Building materials:


1) Stable and Earthquake Resistance;
2) Wind resistance;
3) Long using time up to 50 years;
4) Sound insulation;
5) Environment friendly: Most of the excess material can be 100% recycled;
6) Fast construction, time saving and labor saving;
7) Lower cost and maintenance.ergy conserving and environment protection.
Our excellent design team will design the steel structure workshop warehouse for you. If you give the following information, we will give you an satisfactory drawing.

Wind speed(KM/H)
*Snow load (KG/M2)
*Rain load (KG/M2)
*Earthquake load if have
*Demands for doors and windows
*Crane (if have) ,Crane span, crane lift height, max lift capacity, max wheel pressure
and min wheel pressure!
2.material quality
*Windows and doors quantity,size and location
*Roof and wall material ,sandwich panel or corrugated steel sheet (steel sheet can not heat insulation)
3.Type
*Size--width,length,eaveheight and roofslope
*single slope or double slope
*single floor,double floor or multi floor

1. Professional Design and Engineering Team:

Full Solution for Site Camp Design. We could make design based on all your requirements.

2.Procurement and Manufacture for All Materials for Prefabricated Building:

We have a Professional Procurement team to make sure all materials are with good quality. And Our factory operation under ISO/CE/SGS standard, to make sure the fabrication works with high technology.

3.Site Management and Installtion Supervision:

We could send our engineer to help for the installation supervision, you just nee to prepare a team which know normal construction works will be OK.

With more than 4000tons capacity each month, deliver time will better than local manufacturer.
Packed in container by sea or by train, with stable package for no damage during transpotation

1. How to buy your products?

A: TT and L/C are acceptable and TT will be more appreciated. 50% deposit is paid before producing and the balance before loading by TT.

2.How to control the quality of your product?

A: 1. Quality of the design: think about possible problems in advance and provide a high quality design solution.

2. Quality of the raw materials: choose the qualified raw materials.

3. Quality of the productions: precise manufacturing technique, experienced workers, strict quality inspection.

3. How to deal with quality problems?

A: Warranty is 3 years. Within the warranty period, we will be responsible for all quality problems caused by productions.

4. How to pack the products?

A: We use standard package. If you have special package requirements, we will pack as requirements but the fees will be paid by customers.

5.What is the delivery time?

A: It depends on order quantities. Generally speaking, the delivery time will be within 15 to 30 days.

6.How to install after the goods arriving destination?

A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by customers.