China Dfw-12 Series of Outdoor Exchange High Voltage Cable Branch Box Electrical Junction Boxes Power Distribution Cabinet Power Substation Equipment

Company Introduction:
Dehler Technology Co., Ltd. specializes in producing high and low voltage switchgear, box type substation, cable branch box, outdoor vacuum circuit breaker, isolation switch, grounding switch, load switch and low voltage components and other products.
Overview:
The DFW-12 series outdoor AC high-voltage cable branch box (hereinafter referred to as the "branch box" ) is a new power supply equipment specially designed by our company for the purposes of supporting cable users with 10kV power grid cable system, branching, etc. It is suitable for urban streets, industrial and mining enterprises, residential quarters, high-rise buildings, airports, wharfs and other places.
Model Description:
Structure:
The skeleton of the branch box is welded by angle steel and/or bended steel plates. The body of the branch box is assembled by bended steel plates or stainless steel plates. The two sides are closed; at the front side, there are an inner door and an outside door. The rear door can be opened only when the inner door is opened; all the doors can be free to disassemble. There are cable holes on the bottom, so that cables can be laid in and out; there are cable bearers and fastening brackets near the inlet and outlet line, for the purpose of fixing the cable. The scheme will vary due to different models.
Technical Parameters:
Installation base:
Example of a Typical Primary Circuit Diagram:
Ordering Instructions:
The buyer shall provide the following information to our company:

a)Product name, model, specification, quantity and delivery term.b)The paint color of the case, otherwise as the standard color provided by the manufacturer.c)Cross-section specifications of the inlet and outlet lines of high-voltage cable.d)The name and quantity of the necessary spare parts; can be selected according to Table 12 (the company will not provide spare parts for its standard equipment).e)When the user selects the DFW3 branch box, it is necessary to specify the type of the external structure of the equipment, American-type (horizontal) or European-type (vertical), as shown in Table 10 and Table 11.f)For special requirements, the buyer may consult with the manufacturer.