China Disposable Mask Raw Material Melt-Blown Non Woven Fabric Supplier

BFE99 BFE 95 PP melt blown non-woven fabric of N95 mask
1) 100% PP polypropylene raw materials, referred to as "MB without any additives;To do common melt-blown BFE BFE - 99-95, for a variety of masks filter material
2) g: 15-300 grams;
3) width: 1.65 m, can be cut;
4) with good softness, non-toxic, antibacterial, fog/virus filtering
5) can double composite hot rolling was used to clean cloth/spun-bonded fabric with ultrasonic composite q, hydrophilic after MATS and other health care products used in surgery

TypeBasic Weight(g/m2)

Initial Resistance

(Pa)

Initial Efficiency

(%)

Loading Efficiency

(%)

@2% NaCl, 0.3 um, 85 L/minFM-FS9580+15≤50≥85-FM-N95/C150MB40150+20+20≤110≥98≥95FM-N95/C140MB20140+20≤100≥95≥90

TypeBasic Weight(g/m2)Initial Resistance (Pa)Initial Efficiency (%)

@DEHS, 0.3 um, 60 L/min

FM-P1/MB4020+20≤60≥96FM-P2/MB6030+30≤90≥99

TypeBasic Weight(g/m2)Initial Resistance (Pa)Initial Efficiency (%)

@2% NaCl, 0.3 um, 85 L/min

FM-N90/MB2512.5+12.5≤7090-95FM-N95/MB3015+15≤9595-99FM-N95/MB5025+25≤10098-99.5

7S-FM Specialty Meltblown Nonwoven (MB)

TypeBasic Weight(g/m2)Initial Resistance (Pa)Initial Efficiency (%)

@2% NaCl, 0.3 um,32 L/min

FM-P90/MB2020≤12≥90FM-P95/MB2525≤16≥95

New Technology Introduction:
The main principle of product development is to use a nano-fiber microporous film in the middle filter element of the mask, with a thickness not exceeding 3 microns, waterproof and breathable, and the initial filtering performance of particulate matter exceeds 99%. "High breathability + imperviousness" is the outstanding characteristic of this mask. It is understood that this mask is environmentally friendly and anti-corrosive, and can withstand repeated disinfection treatments such as boiling water, alcohol, and 84 disinfectant, and its performance remains stable. Under normal wear and without damage to the film, the filtering performance can be maintained for 200 hours-based on 10 hours a day, it can be used 20 times.
Yuanchen Company Introduction

Yuanchen workshop covers an area of about 6,000 square meters and is divided into two major
sections, civil and medical, including mask workshops, protective clothing workshops,
disinfection workshops, and laboratories. The design of the 100,000-level clean workshop has its
own laboratory, microbiological testing room, sterile room and positive control room to meet the
requirements of 10,000-level clean standards. Obtained medical license and GMP certification.