China Dkg20 Conventional Rotator

ConVENTIONAL ROTATOR
This welding rotator has the excellence point as the full function, convenient operation and high automatic degree, which is the ideal equipment to finish the the high quality welding and automatic welding for the different tanks.
Equipment consistence:
1 set powered tank rotator and 1 set idle tank rotator and electrical control system.
L Powered tank rotator and idle tank rotator has the welded structure pedestal, which is frame structure and get rid of the stress after welding. It has the character of large loading capability and long time using life. At the same time, two roller holes on the pedestal is machined in one time, which ensures the concentric of both hole.
L Two clamp racks are installed on the tank rotator, it has two rollers, which will touch the workpiece well when the workpiece is put on the roller and the clamp rack will wave around the fixed shaft, so that the roller will suit for the different diameter workpiece and ensure the workpiece cover angle during the range of 45° To 110° .
L The roller is combined by rubber and metallic wheels, the metallic wheel adopts steel forging part, which is quenched on the roller surface with high hardness, the rubber wheel has the character as anti-press, anti-abrading and long time using life.
L The ruducer adopts worm gear and gear wheel couple reducing part, which has the character as resonable structure, steady runing, small cubage, large torque and lower noise, etc.
L The powered motor is protected by the electric components, the veriable frenquency speed adjusting, steady and reliable capability.
L All outsourcing parts are from the country professor manufacturers and ensure the quality and capability.
TypePayload (kg)suitable size of job (mm)wheel Diameter and Width (mm)Linear speed m/h)Motor power (Kw)Speed adjusting wayChange
Speed wayRubber wheelmetal wheelDKG55000Φ250-2300Φ250x1002xΦ240x206-602x0.37Manual lead screw adjustable,
adjustable by bolts shiftVeriable frequency stepless driving
DKG1010000Φ320-2800Φ300x1202xΦ290x256-602x0.55DKG2020000Φ500-3500Φ350x1202xΦ340x306-602x1.1DKG4040000Φ600-4200Φ400x1202xΦ390x406-602x1.5DKG6060000Φ750-4800Φ450x1202xΦ440x506-602x2.2DKG8080000Φ850-5000Φ500x1202xΦ490x606-602x2.2Adjustable by bolts shift
DKG100100000Φ1000-5500Φ500x1202xΦ490x806-602x2.2DKG160160000Φ1100-6000/Φ620x2206-602x3DKG250250000Φ1200-7000/Φ700x2606-602x4DKG400400000Φ1300-7500/Φ800x3206-602x5.5DKG650650000Φ1400-8500/Φ900x4006-602x7.5