China Dolomite Grinding Ball Mill

Dolomite Grinding Ball Mill
Dolomite Grinding Ball Mill grinds material by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. The rotation is usually between 4 to 20 revolutions per minute, depending upon the diameter of the mill. The larger the diameter, the slower the rotation. If the peripheral speed of the mill is too great, it begins to act like a centrifuge and the balls do not fall back, but stay on the perimeter of the mill. The point where the mill becomes a centrifuge is called the "Critical Speed", and ball mills usually operate at 65% to 75% of the critical speed.
Dolomite Grinding Ball Mill Application:
Are generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency with ball mills, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. Various classifiers, such as screens, spiral classifiers, cyclones and air classifiers are used for classifying the discharge from ball mills. Ball mill is an efficient tool for grinding many materials into fine powder. The ball mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc. There are two ways of grinding: The dry process and the wet process. It can be divided into tabular type and flowing type according to different forms of discharging material.
Dolomite Grinding Ball Mill Features:
1) Is an efficient tool for grinding many materials into fine powder.
2) The Dolomite Grinding Ball Mill is used to grind many kinds of mine and other materials, or to select the mine
3) Dolomite Grinding Ball Mill is widely used in building material, and chemical industry.
4) There are two ways of grinding: The dry way and the wet way.
5) Dolomite Grinding Ball Mill can be divided into tabular type and flowing type according to differentexpelling mine
6) To use the ball mill, the material to be ground is loaded into the neoprene barrel that contains grinding media.
7) As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
8) The longer the ball mill runs, the finer the powder will be.
9) Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the ball mill runs.
10) Our Dolomite Grinding Ball Mill have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, powder various chemicals.
11) Complet ely enclosed welded design in high-grade steel.
- Direct drive via bearing journal with top-mounted gearbox.
Motor connected to gearbox via a V-belt drive.
- Product discharge via slots located around the periphery of the drum.
Dolomite Grinding Ball Mill Working Principle:
The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.

ModelSpeed of bucket
(r/min)Weight
of ballSize of
feed opening(mm)size of outputting
feed (mm)Production
(t/h)Power
(kw)Weight
(T)900x 1800381.5≤ 200.075-0.890.65-218.53.6900x 3000382.7≤ 200.075-0.891.1-3.5224.61200x 2400323.8≤ 25
0
075-0.61.5-4.84512.51200x 3000325≤ 250.075-0.41.6-54512.81200x 4500327≤ 250.075-0.41.6-5.85513.81500x 3000278≤ 250.075-0.42-590171500x 45002714≤ 250.075-0.43-6110211500x 57002715≤ 250.075-0.43.5-613224.71830x 30002411≤ 250.075-0.44-10180281830x 64002423≤ 250.075-0.46.5-15210341830x 70002425≤ 250.075-0.47.5-17245362200x 55002130≤ 250.075-0.410-2237048.52200x 65002130≤ 250.075-0.414-2628052.82200x 75002133≤ 250.075-0.416-2947556

Our service:
Training & Service
Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment,
according to your special demand.
Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators
and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory?level of spare parts, which means the replacements can be shipped to you right away.
Welcome to visit our company and workshop, we sincerely look forward to cooperating with
you. We will provide you with the most suitable products with the reasonable price.