China Double-Head DN40-DN200 Carbon Steel Electromagnetic Flow Meter

Double-Head DN40-DN200 Carbon Steel Electromagnetic Flow Meter
The electromagnetic flow meter is suited for flow measurement of all liquids with a minimum conductivity of 5 µS/cm, like chemicals, water with mud, beverages, rough and drink water and others. The flow measurement is independent of density, temperature, pressure and viscosity of the medium.
The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction.
This type of Double-Head Integral Type Electromagnetic Flow Meter can be installed both above ground and underground.
Products Details
Product parameters

No.Parameter NameParameter Content1Measuring medium1. Drinking water
2. Domestic sewage
3. Corrosive sewage
4. Others: 2Diameter(mm)DN15---DN1203Flow rate range0.5-10m/s4Accuracy
1. 1%
2. 0.5%
3. 0.3%5Liner material1. Rubber
2. PTFE
3. FEP
4. PFA
5. Hydraulic PTFE6Electrode material1. 316L
2. Hastelloy
3. Tantalum
4. Titanium
5. Platinum 7Meter reading typeRS4858Antenna type1. External (Default)
2. Internal (Built-in)9Power supply3.6 V Lithium batteries 10Installation type for transmitter1. Integrated (Above the ground)
2. Split11Flange
& enclosure material1. Carbon steel
2. Stainless steel12Pressure rating1. 0.6Mpa--DN1200
2. 1.0Mpa--DN200~DN1000
3. 1.6Mpa--DN100~DN150
4. 4.0Mpa--DN15~DN80
5. Non-standard can be customized by customer13Communication modeRS-485(Standard MODBUS) 14Output signalPulse
Frequency
4-20mA
No output 15Pressure measurement functionYes16Cable lengthIntegrated type17Pipe typemetal pipe
Plastic pipe
Others:18Connection TypeGB
ANSI
DIN
JIN19Grounding RingWith Grounding Ring 20Temperature-25°C ~ +60°C

How to choose lining material?

Lining materialApplicationsNeopreneWater,sewage and slurry,mineral serosity of low abrasionPTFEStrong corrosive mediums such as strong acid and alkaliPolyurethaneA pplicable in mineral serosity,slurry and coal slurry of high abrasion.PFAApplicable in state of load pressureF461.The same as PTFE.
2.Applicable in mediums of low abrasion.

How to choose electrode material?

Electrode materialApplicationsSS316LApplicable in water,sewage and corrosive mediums.Tungsten carbideApplicable in mediums of no corrosive and low abrasion.Hastelloy B(HB)Having strong resistance to hydrochloric acid of any consistanceHastelloy C(HC)Be resistant to oxidable acid such as nitric acid,mixed acid etcTitaniumSeawater,and kinds of chloride,hypochlorite salt,oxidable acid etcTaHydrofluoric acid, fuming sulfuric acid, alkali remaining chemicals etcPlatinum-iridiumChemical mediums except for aqua fortis,ammonium salt.

Factory introduction:
Packing and delivery:
FAQ:

How is the flow meter warranty?

We could provide 12 months warranty for your flow meter .

Could you provide me the shortest lead time?

Our shortest lead time is 5~7 days after your payment.

How to pay for that ?

Of course we could accept T/T, Paypal, Trade Assurance Order, Western Union, you will get full protection for your orders.

Do you accept OEM?

Yes, we accept OEM.

How to deal with the after-sales?

We have 1-year-warranty with 24/7 on-line support and video technical support. If the flowmeter can't work in 6 Months, we can send you a new flowmeter.