China Double-Layer Vertical Ring Die Wood Pellet Machine

Our manufactory has rich experience in this field, with mature production line of 0.5t/h,1-2t/h,2.5 to 3t/h,5t/h, what as your require.In general, the whole biomass pellet machine is composed the following steps: Wood chipping; Drying; Grinding; Pelletizing; Cooling; Sieving; Dust collecting and Packing.

1. Size:if your raw material is bigger than 8mm, better use a crusher.

2.Moisture:if your raw material moisture content is higher than 25%,should by dryer or drying by the sun.

3.Cooler: after pelletizing, if you want to pack the pellets directly, should use a cooler, or put the pellets aside and cooling by nature.

4. Packing machine: after cooling, could pack by manual or by packing machine.

Characteristic:

1.Self -lubrication system

A. Automatic lubricatin system for spindle

B. Automatic lubricatin system for rollers: it can keep the pellet machine in maintenance for 24hours.

2.Output of pellet mill machine: Our machine can reach the expected output in our technical parameter.

3.Working Life of spare parts: Working life of our dies is 2500-3000 hours, much longer than others'.

4.Number of Our Ring Die holes: Our ring die has 5 rows of holes, much more than others'.

5.Driving Method of pellet machine: Our machine is drived by gear, not reduction box; Gear driving is helpful to increase the usage life of gear, so the maintenance rata of gear is much lower.

6.Forged Main Shaft: Our main shaft is forged, not casted. As well known, there is no air bubble in forging process, so it is hard to be broken.

ModelPower(KW)Capacity(t/h)SZLH380300.3-0.5SZLH470550.8-1.0SZLH560901.2-1.5SZLH7601601.5-2.5SZLH8502202.5-3.5