China Double Pillar Type Double Working Station Melt Filter Screen Changer for Plastic Extruder

Double pillar type double working station screen changer for plastic extruder
Performance characteristic:
1. The two filter screens of this kind screen changer work simultaneously, and when screen changing is needed, one screen pack is still on the working position, the other one is replaced. They are replaced one after the other, thus the production process will not be interrupted.
2. Exhaust system device can fully defuse the gas mixed in the materials and improve the product quality and reduce the defective products
3. Double channels expand the filtration area to produce more high-quality production which meet the customers' need.
4. Apply to extrusion production in a wide range of materials and product.
5. Good sealing system ensures perfect sealing effect.
6. The function of filling material exhaust and pollution discharge guarantee the process of replacing screen continuously.
7. We design and manufacture production of various sizes according to the customers' requirement.
8. A well-designed structure makes operation more convenient.
How to work
The double piston Screen Changer allows for filtration of most all polymers without interrupting production during a screen change. The Screen Changer consists of two pistons with each containing a filter cavity. When a screen change is required, one of the pistons is moved out of the housing while the other remains in the operating position. The dirty screen pack is removed and replaced with a new one. The piston is then moved back into the housing to its venting stages before resuming operation. These steps are then repeated for the other piston. This concept allows for continuous filtration with no interruption or loss of production.
Structure and working principle
The double pillar type double working station screen changer is suitable for a wide range of polymers with different production processing, and without disturbing production when changing the screen.
The structure of this kind of screen changer: There are two plungers on the main body of the screen changer, with a screen pack cavity on each plunger.
1, when the screen changer is working, the two screen packs in the cavity are on the working positions,
2, when it's time to change the blocked screen pack, one of the pistons is pushed out of the main body of the screen changer by hydraulic power. While the other one remains on the operating position.
3, The blocked screen pack is removed and replaced with a fresh one, the piston is then pushed back into the main body of the screen changer, and the air venting system begins to work at the same time with this process.
4, the above steps are then repeated for the other piston.
The whole screen changing process allow for continuous filtration without disturbing melt flow and production process.
Applications
PP/PE water pipe extrusion machine
PPR gas pipe extrusion machine
Plate/sheet extrusion machine
Cast film extrusion machine
PET monofilament extrusion machine
PET strap extrusion machine
ABS recycling pelletizer
Masterbatch

Type
Screen D&A
(mm)
overall dimension
Heating power
(KW))
Output
(kg/h) (mm)(CM²)LWHL1 GM-DP-R-80Φ6028x21801702807002.4/3.230-180GM-DP-R-100Φ8050x22202003208103.5/4.780-280GM-DP-R-120Φ10078x22502203609705.0/7.2220-480GM-DP-R-155Φ130113x232027045011008.2/11.1300-700GM-DP-R-170Φ145165x237031048013209.4/12.7400-1100GM-DP-R-195Φ165214x2400380550147010.2/13.8650-1500GM-DP-R-220Φ180254x2440410590162013/17.5800-1800:,.
Remark: As the above specification is subject to change without prior notice