Butyl rubber waterproof sealing adhesive tape Butyl tape
Double sided waterproof sealing butyl tape, automobile sound insulation and shock absorption, color steel plate seam splicing, waterproof sealing butyl tape
Butyl rubber waterproof sealing adhesive tape is made of butyl rubber and polyisobutylene and other main raw materials. According to the special production formula, the latest patented technology, high-quality special polymer materials (imported) and special process flow, it is an environmental friendly solvent-free sealing adhesive material.
Product features
(1) Excellent mechanical properties: high bond strength and tensile strength, good elasticity and elongation, strong adaptability to interface deformation and cracking.
(2) Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance.
(3) Reliable application performance: good adhesiveness, waterproof, sealing, low temperature resistance and follow-up, good dimensional stability.
(4) The construction process is simple.
Scope of application
(1) Roof waterproofing, underground waterproofing, structural construction joint waterproofing treatment and polymer waterproofing membrane lap sealing of new projects.
(2) The sealing and waterproof treatment of subway tunnel structure construction joint in municipal engineering.
(3) Airtight, waterproof and shock absorption at the joint of color profiled board. Airtight, waterproof and shock absorption of the joints in the sunlight board project.
(4) Bonding and sealing treatment in automobile assembly
(5) Waterproof and sealing treatment of joints in steel structure construction.
(6) The butyl adhesive tape with composite aluminum foil is suitable for waterproof sealing of various civil roofing, color steel, steel structure, waterproof coiled material, PC board under sunlight.
Package details :
1mm*20mm40m/roll, 12 rolls/carton box1mm*30mm40m/roll, 8 rolls/carton box1.5mm*30mm30m/roll, 8 rolls/carton box1.5mm*40mm30m/roll, 6 rolls/carton box
Construction method of steel structure roof construction
(1) According to the gap and joint width of the metal plate or joint, according to the engineering design requirements, the specification is selected
Grid size.
(2) Wipe the metal plate joint clean.
(3) Start from one end of the metal plate, open the double-sided adhesive tape slowly, and stick the sealing adhesive tape in a straight line along the seam
At the lap joint of the lower metal plate, then gently press the tape by hand to make it firmly bonded with the metal.
(4) Tear off the isolation paper on the Yongxing adhesive tape, press the metal plate on the upper layer of the interface into the joint, and after bonding
Squeeze the joints in sequence to make the joints firmly bonded and tightly sealed.
(5) Fix and tighten the screws to make the upper and lower adhesive surfaces of the adhesive tape tightly bonded.
Construction method of eaves gutter on metal plate roof
(1) After the prefabricated eaves gutter is installed, the cement surface of the parapet above the eaves gutter shall be cleaned and the base treatment agent shall be painted.
(2) After the base treatment agent is fixed, the flashing board shall be installed to ensure that the installation is firm and closely combined with the wall.
(3) Wipe the flashing board clean, paste the one-sided aluminum foil Yongxing tape at the joint between the flashing board and the cement wall, and press it in sequence to make it firmly bonded;
If the 80mm wide single-sided aluminum foil Yongxing tape is used, the flashing board may not be used.
Construction method of steel structure roof leakage repair engineering
Leakage of metal plate
(1) Remove the original sealant from the lap joint of the metal plate.
(2) Then wipe the metal plate of the repair part clean.
(3) According to the situation of the joints at the water leakage, different specifications of single-sided aluminum foil Yongxing tape are selected;
(4) Directly cover the seam with one side aluminum foil Yongxing tape;
(5) After bonding, the repaired parts shall be rolled in order to make the single-sided aluminum foil Yongxing tape firmly bonded at the joint.