China Dry Type Copper Cable Wire Recycling Machine

TF-400-1 Dry type copper cable wire recycling machine
Liyang Tongfu Machinery Co.,Ltd is professional manufacturer who specialized on recycling and new energy(environmental filed).
We proposes that"remarkable quality practical innovation" Welcome customers contact us for ture business relationships and achieving mutual success also establishes the long-term friendly cooperation.

TF-400-1(capacity:80-100kg/h) is suitable for small size factory or customers who newly start wire recycling. It has compact structure and takes small space, easy to move and operate. only ONE operator is required to start and handle the whole system.

1. Integrated structure, small dimensions, easy to move, saving space.2. Low power consumption, stable performance. 3. Minimum copper recycling rate can reach 99%.4. No water is needed, no dust, no environmental pollution.5. Controlled by electricity control panel, highly automatic.

Applicable wires:Waste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.Applicable wire diameter:0.3-20mm the diameter is for each single strand. If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing.
TESTING IS FOR FREE!

Model Recycling capacityProcessed wire dia.Total powerVoltageDimension Weight JLF-400-180-100kg/h0.3-20mm11.92KWAs required1.5*1.5*1.9m750kg

Pre-treat Machines:
1. Cable stripper: if customer deal with large size copper wires with multi-strand,it is better to separate its cores and then put them into granulator machine.
2. Double shaft crusher: If the raw material is with large lenth, it will be helpful to cut them to smaller pieces before granulating.
3. Blade sharping machine: After long time operating, blades on the granulator machine need maintiance to get good sharpness.
4. Megnatic conveyor: If there is a small part iron mixing inside the copper wire, we can add a magnatic conveyors to take out of the iron mixing of the copper pellet to get high purity.
5. Belt conveyor: It is supplied to customer who required totally automatic copper wire feeding.

Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.


JLF-400-1 copper cable recycling machine will be put in ply wooden case for shipping.

We have standard hot sale models machine in stock in factory for customer inspecting and testing.
We attend domestic and international exhibitions every year.


Attn: Tina
Mobile):+8615981925357