China Dual BWireless Cellular WiFi Radio RF GSM 2g 3G 4G Lte Mobile Signal Repeater Phone Signal Booster with Antenna

Dual Band Wireless Cellular WiFi Radio RF GSM 2G 3G 4G LTE Mobile Signal Repeater Phone Signal Booster with Antenna
WT-CP02 850/1900MHz

A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

Introduction To Mobile Phone Signal Repeater 1. Enhance Mobile Phone Signal Strength2. Improve Communication Quality3. Reduce Cellphone Radiation4. Protract Cellular Battery Life5. Economic Building Cost6. Easy Operation7. Easy Installation8. Build-in Power Supply

1) Underground areas: basements, parking lots, tunnels;

2) Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels;

3) Places distant from the BTS like private houses.

Repeaters are designed to fulfill the idea of one and main principle: to fill the areas with the weak or bad signal and to amplify these low signals in order to provide you with the communication suitable for you.

Frequency rangeUplink:824-849MHz 1850~1910MHz Downlink:869-894MHz 1930~1990MHzGain ( dB)Uplink Gp≥60 DownlinkGp≥65Export power (Po)≥20dBm Power supplyAC110V-240V45~55Hz Size193*140*20mmcoverage area2000 square metersPass band ripple≤3dBI/O impedance50Ω/N connector Noise figure≤4dB Transmission Delay≤0.5μ s Ambient temperature-10ºC~60ºC ReliabilityTo the GB6993-86 standard Electromagnetic compatibility To the ETS300 694-4 standard Functiona) Power supply LED denote b) Export power LED denote

ItemQuantity(Piece)Dual band CDMA/PCS 850/1900MHz cellphone signal repeater1Outdoor Log periodic antenna1User manual1Indoor ceiling antenna1LMR300 Cable with connectors 15m1LMR300 Cable with connectors 5m1Power adaptor1

More indoor antennas and splitters/couplers are needed for more rooms or bigger indoor coverage as one indoor antenna can cover around 250 square meters.
Installation Diagram for More Indoor Antennas.

1.Fix up outdoor antenna reception on housetop and point to signal tower.
2.Connect outdoor antenna to "outdoor" port in repeater machine through cable.
3.Connect indoor antenna(s) to "MOBILE" port in repeater through cable also.
4.Plug power adaptor into AC power socket and finish installation.

1.Please make sure the outdoor antenna is well isolated with the indoor antenna(s). They should not be on the same horizontal line. The outdoor antenna should be on the housetop, at least 10 meters far away from the indoor antenna(s), better with stairs or wall(s) in between. Put the indoor antenna(s) in the middle of room, far away from the window and door.

2. If still no signal reception after activating repeater, please check if outdoor antenna points to signal tower or elsewhere have strong signal and check if strength achieve -70dBm. Please adjust the direction of the outdoor antenna until it catches good and steady signal. To ensure the result, the outdoor signal should be as strong as possible.

Q: Will this signal booster system work in a rural wooded area? I'm not completely in the woods, but I am somewhat surrounded by trees.
A: The signal booster will work if you have a signal outside your house. Put the external antenna in one of the trees to get it higher than your house. Put your phone on field test mode to read signal strength in dBm so you can see the signal faster. Then check around until you find the best signal. Weak but best. Put the outside antenna as high as possible in that location. The signal booster cannot amplify a signal that is completely not available there.
Q: Would the signal amplifier help increase signal at my house with poor call service but has a okay data service?
A: Absolutely your cell signal would increase. It increases both data & voice on 3G & 4G services, so whatever type of signal you can get outside you will get that inside.
Q: Does the signal booster require an Ethernet cable?
A: No, it uses coaxial cable to connect the signal booster with antennas and it's included in the kit provided. Ethernet cable is not required and cannot be used.
Q: How do I now if this signal booster work or not in my country?
A: You can check whether the operators in your country use the same frequencies as any model of our signal booster. We will check for you the details and provide the best solution. Thanks.
Q: Do I need to weatherproof the outdoor antenna; if so, how best?
A: No need, as the outdoor antenna from us is already waterproof.
Q: Can I program the amplifier system to be used only my cell phones , not everyone in the area?
A: Unfortunately not, this amplifier will not let you program it to your phone only. It will work with any phones within its range.
Q: I do not have home internet. Will the signal booster require home internet to work?
A: No, the signal booster does not need home internet to work. And it will boost the signal and provide you internet access via 3G or 4G data from your carriers.
Q: What is the separation distance between outside antenna and inside unit when installing the booster system?
A: The outside antenna and inside antenna is better to be at least 20 feet(about 6 meter) vertical or 50 feet(about 15 meter) horizontal away.