China Dual Motors Adjustable Lectern in Commercial Furniture; Electric Height Adjustable Desk; Sit to Stand Podium

Dual Motors Adjustable Lectern in Commercial Furniture;

Electric Height Adjustable Desk; Sit to Stand Podium

Product Description:

1. Overall closing size: ≤ 1400 * 700 * 700, overall unfolding size: ≤ 1400 * 700 * 1200 (mm).2. The tabletop is made of white scratch resistant wood material with a thickness of 25 mm, and the density of density board is more than 720kg / m3. The surface and four sides of the board are covered with PVC film, which is processed by blister technology to prevent scratching and water splashing. Melamine veneer is used on the back of the table, and the veneer thickness is 1 mm, which is processed by cold pressing process.The formaldehyde emission of the Board meets the E1 standard.3. High quality SPCC cold-rolled steel is used for the lifting leg of the lecture table.4. The baffle plate can be customized (1400 * 450 * 15mm).5. The teaching table adopts double section double motor lifting tripod, the table top height is electrically adjustable, the minimum table height is 700mm, the maximum is 1200mm, the lifting motor dynamic load ≤ 120kg, the static load ≤ 240kg, the motor adopts super anti sliding design, the motor lifting speed is ≤ 30m/s.6. The lifting leg motor controller adopts the universal design of wide voltage 100-240V, and the standby power consumption design is less than 0.1W. The motor controller integrates high-precision collision sensor, gyroscope, super sensitive and error free trigger in case of resistance. The motor controller has complete protection mechanism, including over temperature and overload protection. The controller is controlled by fine software, and there is no error in the height of legs after 10000 operations.7. The lifting motor is controlled by a manual controller. The integrated LCD screen of the manual controller can display the height of the desktop. At the same time, four preset height modes are integrated. The user can add the required height at any time and restore to the preset height by pressing the key, which is convenient for operation.8. The installation position of universal arm bracket for monitor is reserved on the upper layer of teaching table. It is recommended to install 10-32 inch monitor. The display bracket is made of aviation aluminum material, the bearing capacity is less than 9kg, and the display can be adjusted at any angle. Embedded module is installed on the upper desktop of the teaching desk, with square power socket * 2, audio interface * 1, USB interface * 1 and HDMI interface * 1, which is convenient for users to use.9. The computer host is reserved at the position of the lifting leg to facilitate the user to place the computer host; a 1.4m plastic line tank chain is reserved under the table to facilitate the user to arrange and fix the wire.

Product real photos:

Exhibition and Certificate:

Factory:

Guangzhou head office:

Company events:

FAQ:

Welcome to our website: www.pochar.com