Ductile iron pipe 800mm k9DETAILED INFORMATION:Ductile iron pipe 800mm k91). Material: Ductile iron
2). Size: DN80-DN2600
3). Standard: ISO2531/EN545/EN598
4). Length/pc: 5.7m/6m
5). Class: K7/k9/class c
6). Joint type: T-type, flange-type, K-type
7). Paint: BlTransmitter ack bitumen/epoxy paint.
8). Zinc coat: Outside sprayed with zinc (in accordance with ISO8179, not less than 130 g/m2)
9). Cement lining: Inside with cement mortar lining as per ISO4179.
10). Tensile strength: Above 420 MPA
11). Yield strength: Above 300 MPA
12). Brinell hardness: Within 230HBW
13). Density: Above 7g/cm3
14). Spheroidizing grade: Grade 1-3
15). Rubber gaskets: SBR/EPDM/neoprene
16). MOQ: Battery, Storage Battery & Charger 1X40'GP
17). Lead time: Below 1000 tons, 2weeks. Above 1000 tons, depend on your qty.
18). We could also do the teElectronic Instrument st at famous organizations such as SGS, BV, etc.
19). We have shipped our products to Italy, Spain, Syria, Iraq, Philippines, Singapore, etc.EN545/ISO2531 DUCTILE IRON PIPE CHEMICAL ConTENT STANDARDC (%)Si (%)S (%)P (%)Mn (%)Mg (%)Ti (%)Gr (%)3.5-4.01.8-2.6<0.02≤0.08≤0.4≥0.04<0.1<0.1EN545/ISO2531 DUCTILE IRON PIPE MECHANICAL TEST STANDARDBRINELL HARDNESSDENSITYTENSILE STRENGTHELONGATIONSPHEROIDIZElectronic Tube & Transistor ING GRADEWATER PRESSUREZINC COAT≤230HBW≥7g/cm3≥420DN80-DN1000DN1100-DN2600GRADE 1-350KG≥130
G/M210%7%Cable Tools
Contact person: Ms. Yi Weiwei
Position:Senior Sales Manager
Mobile: 86-13500756485