China EA-Orbital Pipe Cutting Machine

OVERVIEW
orbital pipe cutting machine is the best choice for stainless steel thin-wall pipe cutting. This machine adopts metabo motor drive to ensure strong power. It is necessary equipment for pipe welding prep. Optimize design, save space, operate simply, install quickly." Self-centering "type pipe clamping device,Saw blade cutting head can cut off the pipe by rotating around the steel pipe once a week. The end face is absolutely vertical without burrs, and the steel pipe is not deform, providing quality assurance for the welding of steel pipes. It can be used to cut pipe with carbon steel, alloy steel, non-ferrous metals, engineering plastics, etc., widely used in semiconductor, electronics, beer, pharmaceuticals, biotechnology, beverages, dairy, pressure vessels, chemical, oil and gas, ships, water treatment and other industries Processing.

FEATURES
1,Quickly install the blade
2,Cold cutting ,don't influence the pipe's material
3,Vertical incision without deformation, burr-free end surface
4,Deformable clamping device, automatic centering, quick clamping of the pipe
5,option beveling saw for pipe cutting and beveling
6,Unique orbital cutting, thin wall tube cutting best equipment
7,High safety, stationary pipe, cutting head rotation completed
8,Dry cutting, kept cleaning, be welded directly after cutting
9,Saw blade compatible with AXXAIR, +GF+, DCS and other brand pipe cutting machine

CAPABILTY
1,Pipe cut off
2,Pipe beveling
3,Cutting and beveling

SPECIFICATION

Model

Range
0D(mm)

Wallthickness(mm)

Cut Motor

FeedMotor

CS

SS

E4A

Φ15-120

≤12mm

≤4mm

metabo motor speed adjustable
220~230V
50~60Hz
1.1KW

Servo motor speed adjustable
220~230V
50~60Hz
0.75KW

E6A

Φ30-170

≤12mm

≤4mm

E9A

Φ60-225

≤12mm

≤4mm

E13A

Φ140-330

≤12mm

≤4mm

E16A

Φ215-420

≤12mm

≤4mm

E20A

Φ315-520

≤12mm

≤4mm

E24A

Φ346-630

≤12mm

≤4mm

E30A

Φ486-760

≤12mm

≤4mm

Product description:
Above parameters just for reference only, not acceptance criteria

POWER SUPPLIES

Feed motor:
Servo motor Electric
Requirements: 220-230V, 50-60Hz, 1P
Power:0.75KW Speed: adjustable by program

Saw blade drive motor:
Brand: metabo Electric
Requirements: 220-230V, 50-60Hz, 1P
Power:1.3KW Speed: 6-speed adjustable

TOOLING
Material: M42
Standard: 2 cutting blades
Optional:beveling saw blade 30°, 37°, 45°

Standard: cutting blade

Optional: beveling saw blade

Notes
1.Tool selection
Standard with rip saw and fine saw,Fits pipe of different wall thicknesses,General rip saw are more suitable for cutting thicker tubes,fine saw suitable for cutting thin-walled pipe.
Inappropriate selection will result in blade heating. Reduce service life, or even bite-pipe phenomenon, deform the pipe
2.Rotating speed
Choosing the right cutterhead can improve the cutting performance and service life of the tool. Compared to the cutting stainless steel, the lower speed 80rpm is used, and the cutting carbon steel uses the higher speed 120rpm.
3.Cutting rotation direction
When the thin-walled tube 0.3-1mm, the tool rotates clockwise along the tube, which tends to cause deformation of the tube wall when the teeth engage the tube wall. The counterclockwise rotation of the tool (inverse planetary motion) can be avoided very well. This phenomenon
4.Cutting oil
The cutting machine can be processed without using any cutting oil, but the tool life will be greatly reduced.
Saw blade are consumables and their cost is high. In order to improve their cutting performance and service life, we recommend using cutting fluids during cutting. We choose non-toxic and harmless cutting oils, and use them to increase the tool life by 20-30%, if necessary before requisitioning