China EPS Sandwich Wall Panel Forming Machine

EPS Sandwich Wall Panel Forming Machine (ESP Sandwich Panel Production Line) wall panel for concrete precast houses:
1.Full Automatic
2.Eco Saving and Advanced Technology
3.Low cost
4.ISO9001-2000

Introduction of Hongfa Eps wall panel production line/ Machines for cement hollow wall panel
1. Materials of Hongfa Brand EPS Wall Panel & Gypsum board
1) Outside (side board)- Calcium silicate board or Cement fiberboard - Also can be without the side board.
2) Inside (core material)- Cement, Foam EPS, Fly Ash, Additives (Hydroxypropyl methyl cellulose) Or without EPS foam The fly ash can be replaceable by sand or other material.
3) Gypsum board : Gypsum , Glass fiber , Additive, ect.

2. Common Specifications of EPS cement wall sandwich panel
L*W*T: 2440mm/3000mm/4000mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.
2270mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.
Sizes can be customized by requirement

4. Advantages of Hongfa wall sandwich panel
Light weight----Excellent sound insulation----- Heat Insulation
Waterproof Fire proof--------- Energy Efficient Environmental
Convenient construction-----High Intensity without deformation.
Hongfa machinery wall panel production line:
1. Cement wall panel machinery and cement wall panel production line
with 20000m2 to 500,000m2
2. Light weight wall panel making machine with 50000m2
3. Gypsum wall panel machine,gypsum wall panel production line
4. Sandwich wall panel making machine,sandwich wall panel production line
5. Light weight foam wall board making machine
6.Composite wall panel production line,etc.

Kinds of wall panels, Gypsum board , Eps wall panel production line/ Machines for cement hollow wall panel

1.Main Feasture:
(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production.
(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.
(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem.
(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the bad temperature control.
(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.
(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and material conveying to silos.
(7)Most components are of world-famous brands, with reliable performance, stable quality, long service life and low maintenance cost.
(8)The machine can realize the primary and second expansion.

Advantages of Eps wall panel production line/ Machines for cement hollow wall panel
Light weight----Excellent sound insulation----- Heat Insulation
Waterproof Fire proof--------- Energy Efficient Environmental
Convenient construction-----High Intensity without deformation.
The three types of the cement wall board forming machine:
A: Horizontal type EPS wall board forming machine: high level of automatic operation,fewer workers required.
Horizontal TypeOverall dimensionsPowerOutput with different thickness/pieces per mold60mm75mm90mm100mm120mm150mm2750x2504x1359 mm3kw16pcs14pcs12pcs12pcs10pcs8pcs

B: Automatic vertical type: automatic operation,high output,fewer workers required.
Automatic Vertical TypeOverall dimensionsPowerOutput with different thickness/pieces per mold60mm75mm90mm100mm120mm150mm3380x3200x2680 mm4kw40pcs36pcs32pcs30pcs26pcs22pcs

C: Manual vertical type partition wall board making machine: Manual operation,the highest output amount the three types, but requires more workers.
Manual Vertical TypeOverall dimensionsPowerOutput with different thickness/pieces per mold60mm75mm90mm100mm120mm150mm3600x1320x2800 mmno58pcs50pcs42pcs40pcs34pcs28pcs
Suggested Staffing Table:
PositionAmount(Person)Moulding/poring1Demoulding&Packing1EPS Expander Operation/raw materials1Mixer Operation1Transportation1Total5
Main Raw Material and Production Infrastructure Requirements:
Raw Material:Ordinary Portland Cement, Lower Alkalinity Sulfur Acid Salt Aluminum Cement, Polystyrene Foam, Sand, Additives, Fly Ash(Coal Boiler), Water.
Water requirements:to produce 60m2 panel(9 cm thickness as example) required one ton of water. No special requirements for water quality, clean water can be used for production.
Electricity requirement: installed power 100 kw (depending on the capacity)
Requirements on air and steam:Air compressor and boiler.
Land requirements:1200-2000m2 workshop and 9 meters high (depending on the capacity).
Package & Delivery
Packing: Naked packing or stretch film packing or according to customers' requirements
Delivery time: Within 30 days after receipt of deposit and moulds confirmation from buyer
Aftersale service
Guarantee for three year and after sale service for whole life.To offer free design,free technology support and free machine maintenance trainning.
We will provide you with a set of spare parts for free!

1.Analyzing:Plant size, budget, automatic degree, local condition....analyzing all of your requirements
2. We offer technical support until the workers know how to operate.
3. The operating instruction will go to the customers with the equipment. Technology data and relative files for gypsum board plant
4.We provide lifelong guidance . Visiting clients in regular times.
5.Excellent easy-broken parts support for buyers. Easy-broken parts guarantee for one year.

Guarantee for one year and after sale service for whole life.To offer free design,free technology support and free machine maintenance trainning.
Hongfa Group Established in 1990.
A leader developer& Manufacturer of Construction Material Machinery.
Main business Range & Products:
Lightweight Panel Production Line, AAC Block Production Line, Full Automatic Concrete Block Production Line, Artificial Quartz Plate Production Line, Concrete Pipe Machine, Concrete Tile Machine, Concrete pipe machine, Bidirectional Hydraulic Brick Maker, Mining Machinery, Concrete Batching plant, Stereo Parking Equipment, etc.
Hongfa Strengths
More than 26 years experience. 1500 employee (50+engineers)
2) Total 4 factories with 440,000M2 and annual sell above USD100 Million .
3) 10,000 customers and fulfillment to over 120 countries.
4) Continuous service and logistics system.
5) High quality products and competitive price.We hope we can cooperate with each other and establish a win-win business relationship.
1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.National Enterprice Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protectionb Demonstration Unit
4.High and New Tech Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12.Advance Quality Management Unit
Please not hesitate to contact us if you are interested in any kinds of products.
Contact Information:
Foreign Trade Dept. : Emily Lee
Guangxi Hongfa Heavy Machinery Co., Ltd.
Tel:/what's up : +86 15177094840
Wesite: www.gxhongfa.cn