China ESP8266 uart ESP-01 ESP-01S ESP-01M ESP-01F ESP-07 ESP-07S ESP-12 ESP-12E ESP-12F ESP-12S WIFI Wireless Module

Product Description
ESP8266 Serial to WiFi Module (ESP-01)With the popularity of IoT. Internet-connected devices built with Arduino shields or single-board computers like the Raspberry Pi and Beaglebone has exploded and there is a big demand for low-cost and easy-to-use WiFi modules. Thats where the ESP2866 Serial to wifi module comes into picture. The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.
This module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF parts.Specifications of ESP8266-07-802.11 b/g/n-Wi-Fi Direct (P2P), soft-AP-Integrated TCP/IP protocol stack-Integrated TR switch, balun, LNA, power amplifier and matching network-Integrated PLLs, regulators, DCXO and power management units-+19.5dBm output power in 802.11b mode-Power down leakage current of <10uA-Integrated low power 32-bit CPU could be used as application processor-SDIO 1.1/2.0, SPI, UART-STBC, 1x1 MIMO, 2x1 MIMO-A-MPDU & A-MSDU aggregation & 0.4ms guard interval-Wake up and transmit packets in < 2ms
-Standby power consumption of < 1.0mW (DTIM3)Featurs of ESP8266 ESP-12F· 802.11 b/g/n· Integrated low power 32-bit MCU· Integrated 10-bit ADC· Integrated TCP/IP protocol stack· Integrated TR switch, balun, LNA, power amplifier and matching network· Integrated PLL, regulators, and power management units· Supports antenna diversity· Wi-Fi 2.4 GHz, support WPA/WPA2· Support STA/AP/STA+AP operation modes· Support Smart link Function for both Android and iOS devices· SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIO· STBC, 1x1 MIMO, 2x1 MIMO· A-MPDU & A-MSDU aggregation and 0.4s guard interval· Deep sleep power <10uA, Power down leakage current < 5uA· Wake up and transmit packets in < 2ms· Standby power consumption of < 1.0mW (DTIM3)· +20dBm output power in 802.11b mode· Operating temperature range -40C ~ 125C· FCC, CE,IC ,ROSH and REACH certifiedESP-12FCommon ESP8266 module versionESP-12S Optimized from esp-12f, better antenna singalESP-07S Pin compatible with esp-12, IPEX connector to get greater signalESP-01S General DIP PTH version, less pin lead out, easy to useESP-01M Vertical stand on your PCBsave space and better signal
Product Details
Exhibition
Advantages