China Easy Fast Build EPS Cement Sandwich Wall for Prefab House Interior Walls Exterior Walls

Easy and Fast Build EPS Cement Sandwich Wall for Prefab House Interior Walls/Exterior Walls

Component of EPS Cement Sandwich Wall

EPS cement sandwich panel is a new generation of high-performance wall panels produced by industrialization. It is composed of a variety of raw materials such as portland cement, sand and fly ash and replaces traditional bricks and hollow blocks. It has the advantages of environmental protection, energy saving and pollution-free, lightweight earthquake resistance, fire prevention, heat insulation, sound insulation and fast construction.

Specification.Length:2270mm,2440mm
.Width:610mm
.Thickness:60,75,90,100,120,150mmpackingFree packing,normal pallet+packing belt
Standard exporting packing,good pallet+pearl wool+corner protective paper+packing belt+plastic thin film.
3.packing size:2270*610*1000mm,2440*610*1000mm
4.Loading:18 pallets per 20' container for 2270mm boards.
14pallets per per 20' container for 2440mm boards.MOQOne 20' container
1.2270*610*60mm boards:360pcs(498)
2.2270*610*75mm boards:252pcs(349)
3.2270*610*90mm boards:216pcs(299)
4.2270*610*100mm boards:180pcs(249)
5.2270*610*120mm boards:162pcs(224)
6.2270*610*150mm boards:126pcs(174)

Cement Adhesive
The cement adhesive is mainly made from the normal Portland cement, mixed with anti-crack materials and some polymer and related additives by the predry mixing technique, the finishes appear as powder.
It can be used for connection of wall panel gap. It has good anti-crack performance for the gap of two wall panel.
Anti-crack Tape
Performance: excellent capacity of anti-cracking, thin, soft, easy connecting, durable, environment-friendly product. It is the best stitching and decorative product for the gypsum board, plywood board and other wall board.
Spec.: 5cm(W)x100m(L) 10cm(W)x100m(L)
Usage: Clean off dust in the gap between two panels. Pasting glue on the gap, then stick the anti-crack tape on the gap.

Easy Installation of EPS Cement Sandwich Wall

1.Put wire,transport board in place, pop up or down the wall plate and gauge double in the respective axis mount.
2.Any use of drilling to cut according to wall plate specifications.
3.Put cement binder and wall board in foundation.
4.Put cement binder,two pieces of the tenon on one side cement to wipe polymer mortar on any tongue and sides.
5.Installation,firstly prepare for the installation of plate moved into connection location,wall correction with a crowbar,use force tightly,to let polymer mortar extrusion from the joints in high spirits.
6.Adjustment,use wood wedge to bit into the bottom of the wall plate so that it adjust vertical formation
7.Correction,fix,use more than 2m or 2m guiding rule to check vertical,flat correction.
8.Grout,fill the pulp,use polymer mortar to infill and flatness after correcting the wall body,use polymer mortar to fill the gap size up or down.
9.Fixed,upper part of wall panels with Φ6mm or Φ8mm steel reinforce in the middle of walls by 45 degrees to bit into,the bottom with "7shaped"ribbed steel,one head is bitten into concrete base,the other head is bitten into the wall plate.

More information(catalogue, project, installation process) please contact:

Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://www.zhongjingtai.com/

Facebook: Freda Lin