China Eco - Friendly Interface Agent Dispersion Primer

This product is mixed with kinds of inorganic materials, organic water retention and thickening material, which is Non-toxic, tasteless, no radiation, no pollution, according with environmental requirements; it is non-burning and non-bursting, applicable to general goods storage and transportation.Moreover, because of applying coating treatment process, easy construction, less dosage, it is widely used in the fields of architectural decoration, reconstruction of old buildings, moisture-proof and waterproof, etc.

Technical Specification

ItemRequirementColorwhiteDry time1h-2hspecific consumption100-150g/m2conditionliquidApplication temperature5-30ºCQuality Guarantee Period12monthsSolid content≥15%density1.0kg/LPackaging Details:20kg per bucket

Scope of Application

It is used to seal pores in substrate making the self-levelling compound and adhesive fully develop their performance and effectiveness,therefore it is an ideal substrate for adhesive.

Features of performance:

1. water-based polymer emulsion

2. Reduce ground absorbent

3.Economical and practical and very easy to apply, high coverage rate.

4.quickly setting

5.High adhesion, suitable to most substrates.

Application Instruction:

The surface should be clean,dry and strong without coosepart loose layer. The substrate should be cleaned thoroughly.

The product can be diluted with water, the water proportion base on the substrate situation.

The coat of the product can be applied by roller. The application should be made even.

Dry time is about 1-3h.

Notice:

The product should be protected against frost and direct sun light during transportation, storage and application. Application temperature should not be lower than 5ºC.

Safety And Health:

The product is environment-friendly product. It is doesn't contain formaldehyde, chloride or aromatic hydrocarbon and heavy metal such as lead, mercury, cadmium ect,at all. Is is safe and nontoxic;therefore it belongs to non-hazardous goods.