China Economic 130W 80W Mixed Metal Non-Metal CO2 Laser Cutting Engraving Machine 13002500mm

Economic 130W & 80W Mixed metal Non-metal Co2 Laser Cutting Engraving Machine with Dual Heads1300*2500mm

Features

1.Welding machine bed with quenching treatment to remove away the stress .Milled by Large precision gantry milling machine ensured the accuracy.

2.Equipped with double economic mixed metal&non-metal cutting head. Stainless steel, carbon steel, acrylic, leather, foam, and wood can be cut.

Laser head A1: with Reci W6 130W Co2 laser tube, mainly used for thin 1.2mm thickness metal cutting & thick non-metal cutting, laser head A2: with EFR F2 80W Co2 laser tube, used for non-metal fine engraving cutting.

3. Adopting imported focus lens with high luminous and mirror with high relativity ensure stable power transference and laser beam consistency.

4. High strength Knife Strip Table: With oxidation treatment and low reflection ratio Ensured cutting quality.
5. Automatic lifting table:with 280mm up-down distance for thick material and rotary device working.

6.Motion System: imported High precision, low friction force and stand wear and CSK Taiwan linear square guide rail and blocks with 3M belt ensured stable transmission, lower noise.
7.With advanced embedded Leetro MPC 8530 DSP real-time mixed metal & non-metal laser cutting control system, running faster, laser intensity and speed automatic matching, perfectly realized the consistency of the corner cutting effect high strength cutting table, applicable for metal and non-metal cutting.

8.Industrial water chiller CW-5202 is equipped to ensure the machine can work last long time.

9.Rationalized placement of the electronic parts. Optimized heat dissipation effect. Ensured system stability and anti jamming capability.

Technical Parameters

Effective working area of each laser head

1200*2500mm

Laser Type

Co2 sealed-off laser tube

Laser tube power

A1: W6 series, Reci, Beijing

(Rated power: 130W, max. Power: 160W)

A2: F2 series, EFR, Beijing

(Rated power: 80W, max. Power: 95W)

Working table

High strength knife strip working table

Driver mode

3 phases stepper motor and Driver, Yako brand

Guide rail

Linear square guide rail ( CSK,Taiwan)

Transmission

3M Belt transmission

Control panel

English

Laser output control

1-100% software setting

Engraving speed

0-60000mm/min

Cutting speed

0-10000mm/min

Control system

Leetro MPC8530

Control software

LaserCut 6.1

Design software when delivery

CorelDraw

Control panel

DSP offline

Resolution accuracy

< 0.01mm

Location precision

< 0.01mm

Highest scanning accuracy

2500DPI

Type of cooling

Industrial chiller, CW-5202 cooling

Water protection system

Yes

Oxygen control system

Have

Blow-off system

Air pump & air blower

Working temperature

0-45 °C

Operating humidity

5-95% (without condensed water)

Supporting picture format

PLT,DST,DXF,BMP, DWG,AI,LAS,etc

Voltage

AC 220V/110V, 50/60Hz, single phase

Certificate

CE/FDA

Applications

Applied to a certain of metal and non-metal materials Professional engraving/cutting such as stainless steel,carbon steel,wood,organic glass,plastic, cloth.

Widely used in the industry of Advertising, craft gift, shose, toys, garment, model, construction, package, paper and computerized embroidery &lipping.
Reference Sample Photos

Reference Working Videos
https://www.topchinasupplier.com