China Edge Rounding Cum Shaping Machine Cardboard Chamfering Machine Insulation Board Processing Equipment

DJJ-60 Edge Rounding Cum Shaping Machine
1.The application
This machine is designed especially for milling the laminated paperboard batten into R edge or chamfering angle for the spacers in the transformer oil gap.
2.Structure of equipment (device)
Working table (machine body), milling cutter, active rollers for compressing material, bracket, electrical cabinet and dust collecting hood.
2.1 .The working table----is equipped with a guide plate and a plate of compressing materials.
2.2.The milling cutter shaft----there are two vertical shafts at the right and the left, and the milling cutter of four edges is used, in which one is a fixed shaft and the other is a transverse movable shaft.
2.3.The active shaft to compress materials----two active rollers for compressing materials.
3.The main technical parameters
3.1.The range to process the rectangular battens:
Thickness (3~5)mm Width (6~70)mm Length (>500)mm

3.2.The range to process the battens for spacers:
Thickness (1.5~3)mm Width(10~70)mm Length(>500)mm
Thickness (4~15)mm Width(6~70)mm
3.3.The size for chamfering round angle
3.4. The length of batten to process 500~3000mm

3.5. The RPM of cutter shaft 6000r/min

3.7. The feeding speed 0-20m/min VVVF

3.8. The moving distance of the vertical cutter shaft 6 ~60mm

3.9. The motor of the milling cutter shaft 1.5KWx2

3.10.The feeding motor1.5KW

3.11. The motor of dust collect 3 KW

3.12. 1600mmx1000mmx1100mm.

4.Machine body color: RAL7032Movable and alarm parts color: RAL1003
Control cabinet color: RAL7032
5.The technical requirement
5.1.The surface processed is smooth, on which there is no any carbonization, no obvious tools marks as well as wavy shape.
5.2.The electrical equipment is safe and reliable, which is equipped with a safety device (such as over-current protection, emergency stop button, etc..)

5.3.There are the reliable safety hoods for the other motors and the transmission parts to prevent from personal injury or equipment damage.
5.4.This machine is equipped with the interface for the dust collection device.
5.5.The power supply:3 phrase and 5 wires (3 live wires, 1 neutral wire, 1 earth wire),380V AC,50Hz;The single phase for controlling the circuit: 220V,AC,50Hz.