China Electric Cement Bending Testing Machine

1. Usage
Model DKZ-6000 Electric Cement Bending Testing Machine is mainly used for determining the cement mortar flexure strength in cement plant, construction unit, certain colledge, scientific reach department, and so on.
The max. Test force is 1200N when using single-lever, 6000N when double levers. There is conversion marks of fluxure strength and resistance special for cement motar on the tester scale. It can read to 0.4N and 0.001Mpa when the max test force is 1000N, 1N and 0.005Mpa when 6000N.
2. Structure
Model DKZ-6000 Electric Cement Bending Testing Machine is consisted by: base, post, upper beam, long and short pulling pole, big and small lever, tilt angle indicated board, flexure jaw, moving weight, big and small balance weight, transmition motor, transmition screw and electric control box, and so on.
Single lever test force ratio (upper beam arm distance ratio) (max.)10:1Double lever test force ratio (lower beam arm distance ratio) (max.)50:1Max. force valueSingle lever1200NDouble lever6000NLoading speedSingle lever10N/sDouble lever50N/sMotor modelSD-75Flexure jawDiameter of loading roller and supporting roller distance10mmSupporting roller distance100mmBaffle plate span46mmMeasuring accuracy<±1%SensitivityLevering the lever when using double levers, load 1g at 500mm lever distance to the supporting point.Lever angle>1/50Outline dimension (LxWxH)(1200x250x760)mmNet weightabout 100Kg