China Electric Fabric&Non Woven Fabric Roll Slitting Machine

Electric Frabric and Non Woven Fabric Roll Slitting Machine
Funcional characteristics:
This machine is slitting equipment of high precision and high sensitivity,
With inflatable bearing is used for feeding and receiving materials.
imported magnetic powder clutch is adopted to control the tension.
imported gas sensitive device is adopted to detect the rectification of rolling,
With fully automatic hydraulic rectification control. Automatic detection, rectification and metering can be realized.
It is characterized by accurate slitting, fast slitting speed, ease of operation and maintenance, etc.
Purpose:
It is applicable for the laminating and slitting tooling of industrial adhesive tape, cellophane tape, protective film,
Copper foil, aluminum foil, OPP, PE, PVC, sheet, cloth, etc.
This mahcine is widely used in the industries such as printing, packing, electronics, leather, clothes making, plastic, etc.
Model: DP-1600 Multifunction Slitting Rewinding Machine
Max Feeding Width ( mm ): 1600
Main Engineer Power ( KW ): 6
Speed (T/M ): 80
Size ( mm ): 2400*2300*1300
Weight (kg): 1500
Feeding diameter ( mm ): 800
Rewinding diameter ( mm ): 450
Precision ( mm ): ± 0.10
Power: 380V 50Hz
Machine Name :DP-1600 Slitting Machine(Two Motor)1. Technique Data
Machine Speed : 110m/min
Max material diameter : 1600mm
Feeding Diameter : 800 mm
Rewinding diameter : 450mm
Slitting accuracy :±0.1mm
Voltage:380V 50HZ
Main Motor Power :5.5kw (2 motor power)
Total Power: 8kw
Raw material Max hole diameter: 3"
compress air source:(0.4-0.6)Mpa(customer-owned)
Finished products Min. Width by standard slitting :25MM
Main Machine size :2400*2300*1300mm
Feeding Machine size : 1950*880*780mm
Weight : 2.2T
2, Feeding Device
Feeding Air Expansion Shaft (3"Pad Shaft) 2 Sets
magnetic powder brake100N1 Set
Film release Magnetic Powder Brake 50N 1 Set
Feeding Tension Control System2 Sets
Correction System(Taiwan Gas and Liquid correction)1 set

3, Renewal Material Laminating Part :
Upper Laminating COTS Dia.135(PU) 1 Set
Under Laminating COTS Dia.135(PU) 1 Set
Aluminum guide roller(hard Oxygen surface treatment) 1 Set
Pressure roller pneumatic type top and bottom system adjustable : 1 Set
electronic counter1 Set
Film Release tensioning adjustable system
4. Reeling end
Receiving Flatulence axis(3″Pad shaft)2 Sets
magnetic powder clutch 50N 2 Sets
he receiving tension control system 2 Sets
Main electrical machine (double motor)1 Set
Main Power inverter1 Set
Winding shaft and pneumatic up and down device(Rise,descend ,support) 1 Set
5. Operator control box1Set
6 . Electric control panel1 Set
7. Function Profile
frequency control of motor speed, operation more easy. Control more accurate.
Double receiving roller center take up , rewinding
Double receiving magnetic powder tension independent control, can rewinding at the same time , and also can individual use
Electronic meter counter with the function of automaticly count the meter and setting length, automatic stopping ,accuracy 0.01, error ±0.15M
Independent fan waste discharge.
Double motor configuration,The scroll of rewinding can be positive and negative transfer .
8. Slitting part
Slitting up and down cutter 10 sets
Circle tool apron10 sets
Slitting up and down cutter gasket:1/2/5/20/30/50 each 13 pieces10MM12pcs