China Electric Remote Control Stainless Steel Water Fire Monitor for Truck

This monitor is made of stainless steel which is widely used on water truck fire truck, boat, chemical factory, airport, tower, wharf etc. The key parts are selected. The motors are imported from USA and Taiwan. The sensors are imported from Germany. Each Monitor is well tested before delivery. All the monitors are CCC certified.
1. Good Material: Stainless steel monitor body and aluminum hard anodized nozzle.
2. Selected key parts: Motors are imported from USA and Taiwan. Sensors are imported from Germany.
3. Remote Control is available.
4. Water way is 2.5'' which is big enough for the max flow 60L/S.
5. Stream Sharper is available to make sure good performance.
6. Control box works on off road.
7. The warranty is 2 years.

Weight in Kg Incl. Nozzle Approx.
24KG
Range of Motion+90°/-55° vertical , 360°HorizontalOther Degrees Adjustable
Material
Body Stainless 304(standard) Stainless 316 (optional)
Speed
(of high speed version)
24°/sec rotation , 10°/ sec verticalAluminum Hard Anodized NozzlePower Consumption Max.24V @ 7.5AGear bronzePower Supply24 VDC
Flow Range @ 7 bar
(Max recommended)
Nozzle Model: AN40 - 24Vdc Jet Spray
Nozzle - AdjustableReaction ForceUp to 900NMechanical InstallationSupport must withstand 4000 N of force
Flow Rates of: 1200 LPM - 1800 LPM -
2400 LPM @100PSIOptionsNetwork, radio remote , aux control etc.Max. Reach @ 7 bar60M

Type : PSKD20
Flow Range: 20L/S (320GPM)
Working Pressure: 6 bar~ 8 bar
Max Reach @ Max Flow: 60M (148-180ft)
Max. Range of motion: +/-90°Vert , 350°Rot
Max fog angle :120°
Turning speed:18 degrees/sec
Material (body):304L Stainless Steel, 316L Stainless Steel is also available
Material (Gear):hardcoated anodizing aluminum
Material (nozzle):Alumimun
power supply:12/24VDC or 100-230VAC
Power Consumption normal/Max:50W/150W
Weight incl. nozzle:appox 20kg
Cable Length Monitor- CPU:5m
Cable Length Joystick-CPU:5m standard/ other length available
Pump requirement for minimum performance:40L/S@ 6 bar
Pipe dimensions for installation: 2-2.5 Inch
Monitor Inlet:2.5" male BSP or DN65 flange
Monitor Outlet:2.5 inch (50mm)
Water way size: 2-1/2 inch
PACKAGE: SS MONITOR, NOZZLE, ConTROL BOX, JOYSTICK, CABLES, WIRELESS ConTROL (OPTIONAL)

NAMEFIRE MonITOR BODY24Vdc ELECTRIC JET SPRAY NOZZLEJOYSTICK
PART IMAGE


PART#PSKD20AN40CTRL - J01
BRIEF DES- CRIPTION24Vdc Electric Remote ControlledSelectable Flow Rates OfUp-down-left-right,straight stream/fog function2 ½ "NH outlet1200 LPM 1800LPM 2400LPM @ 100PSIPower indicatorStainless steel 2 ½" waterwayIP67 standard seal actuatorAluminum baseBronze worm , stainless steel gearFixed fog teeth 2 ½" ANSI 150# Inlet flange NAMEConTROL UNITStraight Bore Branch Pipe Nozzle OPTIONALCABLES
PART IMAGE

PART#CU-01SN-32CTRL-CB01 / CTRL-CB02
BRIEF DES- CRIPTIONAluminum coverHard Anodized Stacked Tip Branch Pipe Nozzle c/w Inbuilt Stream Shaper - 32mm End Nozzle Orifice TipJoystick to Control Unit cable- 5m lengthIP67 Standard sealedMonitor to Control Unit cable- 12m length 2 ½" NH Female InletOther length cables please specify

Since the company was founded in 1996, SXFIREPRO has evolved and grown from a small factory in the yard with the limited capacity to only make couplings, to a sophisticated and leading factory, that now spans over 35000 square meters and employs over 60 skilled engineers, craftsmen, and mechanics - a figure that continues to grow. As one of the family-owned fire equipment manufacturers in China, SXFIREPRO continues to instill the tradition of product excellence, acute customer care, and superior service.

Over the past few years, SXFIREPRO has pushed and expanded its product line to fire monitors, fire nozzles, bladder foam tanks,foam concentrate,fire robots, etc., Unlike most fire equipment manufacturers, sxfirepro also delivers on the meaning of custom-crafted appatatus. Working side-by-side with each customer, sxfirepro will construct your vehicle based on your specific department's needs, The Shengxin team - from the best engineers and draftsmen to highly skilled mechanics and craftsmen will always give you a surprise on the quality. An sxfirepro product is as unique as our customers.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free if the cost is below USD20 with freight on your cost.
Q: How long is your delivery time?
A: Generally it is 5 days if the goods are in stock. Or it is 15 days if the goods are not in stock, it is according to quantity.
Q. what is your payment term?
A: T/T 30% payment in advance, balance to be paid prior shipment.

Q: what is your main market?
A: ,Western Europe,North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia.
Q: Can I have my own customized product?
A: Yes, we can supply logo Print and package desiged based in our MOQ.