China Electronic Hotel Door Lock with Smart Card

Characteristics Of The Electronic Hotel Door Lock System :

Lock Features:

The Microwave Sensing Technology Of Forefront, Even If The Card Is Put In A Black Wallet, The Lock Can Be Easily Open. High Stabilization And We Overcome The Limitation That The Traditional Infrared RF Lock Cannot Be Normally Used Under The Too Strong Or Too Weak Light. Ultra-Low Power Consumption, Which Is Equal To Half Consumption Of Similar Products.Outstanding Design For Security PVD Coating, Durable And Not Easy To Fade.Open Lock Method: Cards, Or Emergency Keys

Technical Parameter:

Power Supply: DC 6V.The Alarm Point Of Low-Voltage Is 4.8V.Main Material: Steel, BrassService Durability: More Than 100000 TimesLife Time: 10 YearsThe Range Of Gate Thickness:38~55mmRecommended Gate Thickness:42~45mmWeight: 3.7KGEnvironment Requirement: Temperature:-45 Degrees Centigrade~80 Degrees Centigrade; Humidity:≤95%Effective Time Of Opening The Lock: 5 SecondsQuiescent Current: <30 UA

Main Functions

Management Classification--Totally 15 Different Types Macards: Emergency Card, Master Card, Multilayer Card, Floor Card, Guest Card, Staff Card, Backup Card, Temporary Card, Report Lost Card, Terminating Card, Authorized Card, Cipher Card, Room Number Card, Clock Card, Clear Card; Time Limited Function--As Long As The Guest Is Expected To Check Out, The Guest Card Will Be Inoperative Automatically. The Record Function--The Lock Records The Latest 200 Times Unlocking Information. The Function Of Avoiding Disturbing--After The Door Is Locked From The Inside, Any Card Except Emergency Card Cannot Open The Lock. The Function Of Alarm--once The Batteries Voltage Is Not Enough, The Door Isnt Totally Closed And Other Abnormal Situations, The Lock Will Keep To Remind The User By Buzzer. The Access Function--When Necessary, We Can Set Four Kinds Of Locks Which Are Room-Access, Floor-Access, Building-Access, And General Access.

Chip levelTechnical GradePower
4 AA alkalescency batteries, DC 6V,
Use life:one year normallyWorking temperature
-10° C~60° CStatic working current
≤ 40μ AMotor starting current
≤ 120mAOpen lock time
6 secondsAntistatic interference ability
≥ -15KVLow power alaarm
4.8V± 3%Door not closed alarm
Lock will voice if the door not be closed well Unlock records
At least 260pcs unlock records
(both keys and card are have records)Lasting quality
≥ 100000 timesUse life
≥ 10 yearsAccepted for door thickness
38~55mmRecommend door thickness
42~45mmAverage failure rate
Normal use ≤ 1/50000 timesLock weight
3.8kg

Card feature

Module
13.56MHz Philips Mifare one cardCapacity
8K digit EEPROM has16 sector, each section have 4 blocks, each block has 16 bytes,
Each sector has two groups independently password, which control the read-write operation separately.Characteristic
No power supply, own antennas itself, encrypted control logic and communication logic circuits inside, and each card has a unique serial number of 32-bit.Safety
Chip very difficult be copy: if 3 time consecutive password validation errors, chip will destroyed automaticData Save
≥ 10 yearsOperation life
≥ 100000 timesCollision
support multiple CARDS operationWorking temperature
-10° C~60° CWorking Humidity
90%Measurement
85mm(L)54mm(W)Reading and writing distance
≥ 2.5cmWhere is the chip
Chip is inside of the CARD

Company Information