China Electrostatic Spray Powder Coating for Strong Box

electrostatic spray powder coating for strong box
Used for:To electrostatic spray all metal products as follows,
Steel products
Gavalized steel products
Iron products
Aluminium products
And so on
Curing information:
Can be adjust on base of customer's requirement
Normal curing is as follows,
For outdoor use:200degree/10minutes
For indoor use:180degree/15minutes
Basic information:
Hardness:1H-2H
Adhensive:0 class
Impact:50kgs
Gloss:5%-100%
DEscriptION
"Polyester" is a series of polyester based powder coatings with the use of TGIC(Can be produced without TGIC for customer's requirement)
Designed for exterior or interior use.
Offering excellent light and weatherability from a single coat finish on a variety of substrates.
This series are available in a wide range of colors with different gloss and texture.
Main properties:
Excellent UV resistance for exterior application;
Good heat resistance
POWDERS
Chemistry: Polyester
Particle size: Suitable for electrostatic spray
Storage: Dry ventilation conditions below 30ºC
Curing schedule: 200ºC/10minutes;190ºC/15minutes
Specific gravity: 1.2-1,8g/cm3 up to colors
STORAGE
1.Under dry conditions,good ventilation at a temperature not exceeding 30 C,humidity<60%
2.Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
3.Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
4.Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.