HV-300E Electrosurgical Generator
HV-300E Electrosurgical Generator
Versatility in office-based Electrosurgery
For general electrosurgery needs in the office, clinics, or emergency room, the HV-300E generator provides exceptional performance, reliability, and safety benefits in a compact, easy to use unit.
Ease
Ease and quick to set up; compact and light
Save time with automatic access to previous used power settings and modes
Provides precise surgical effect with power control dials
Flexibility
Performs most common office-based electrosurgical procedures
Includes both monopolar and bipolar outputs
Reliability
Manufactured to the highest standards of quality in electrosurgical technology
Ensure consistent clinical performance over a variety of procedures
Safety
Increased patient safety with a return electrode contact quality monitoring system (REM). The REM system continually monitors patient impedance levels and deactivates the generator if a fault in the patient/return electrode contact is detected.
High Frequency leakage
Bipolar: less than 60mA
Monopolar: less than 150mA
Low frequency leakage
Source current, patient leads, all outputs tied together
Normal polarity, intact chassis ground <10uA
Normal polarity, ground open <50uA
Reverse polarity, ground open <50uA
Sink current, 140V applied, all inputs <50uA
Power readouts
Agree with actual power into rated to within ±20% or 5W, whichever is greater, Dossage Error monitor.
Unique features of the HV-300E Electrosurgical Generator
Improved performance at lower power settings minimizes the risks of tissue damage and neuromuscular stimulation
Easy to use, cost effective system when performance is required and price is of equal concern
Two monopolar cut modes: pure cut and blend cut
Pure cut for a clean, precise cut
Blend for cutting with hemostasis
One Monopolar Coag mode:
Provide rapid contact coag for cavity mirror surgery as well as other delicate tissue
One bipolar mode: Bipolar coag:
Bipolar coag: with the active electrode formed one confined circuit to perform the surgery; minimized damage to tissue by limiting the amount of tissue involved in the electrosurgical circuit.
Versatile system that is uniquely compatible with other, including:
Optimumm Smoke Evacuation System-Clean air in the operation theatre
Technical Specifications
Output Frequency 512Khz
Line Voltage: 110V/220V~
Line Frequency 50/60Kz
Weight and Dimensions
Height: 24cm
Width: 26cm
Length: 10cm
Weight: <3.5kgs
Applicable range
Applicable for general surgery, thoracic surgery, orthopedics, obstetrics and gynecology, urologic surgery, cerebral surgery, microsurgery, ENT surgery and etc.
Output Characteristics
ModeRated loadMax.output powerOpen-circuit peak-peak voltageMonopolarPure cut500Ω100W900VBlend Cut500Ω80W1450VCoag300Ω60W1550VBipolarCoag100Ω50W580VBlend 12300300250Blend 22500300200Blend 32800300150Monopolar CoagFulgurat2800300120Spray7000300100