EN3 Certificated Co2 Fire Extinguisher 5kg
·British Standards Institution(BSI) certified to BS EN3
·ISO 9001 certified quality management system, CE approved
·Suitable against class A(carbonaceous, B(flammable liquid), class C(flammable gas) and live electrical fires
·All fire extinguishers must be serviced in accordance with BS5306
·Polyester powder external coating
·All fire extinguishers are tested no leakage
·Brand name: Pri-Safety
Alloy-steelAluminum-AlloyCapacity2kg5kg2kg5kgItem No.K2K5AK2AK5Out-Dia.(mm)103.5136111159Cylinder Length(mm)475650475580Volume(L)37.53.28Full Weight(kg)6.615614Temperature Range-30~+60-30+60-30+60-30+60Working Pressure(bar)174174174174Test Pressure(bar)250250250250Fire Class34B70B34B89BPacking Size(mm)155X135X595215X155X77160x130x595220x170x700Quantity/CTN(pcs)1111Quantity/20ft (pcs)2200110022001100
Operations Instructions
1. Before attempting to fight a fire with a fire extinguisher it is important to check that it is fully charged (Fig. 1) and that the safety pin is not bent (Fig. 2)
2. Ensure you remain a safe distance from the fire and remove the safety pin (Fig.3) this will break the tamper seal
3. Aiming the extinguisher:
a) Solid Materials: Aim the hose at the base of the flames, moving across the area of the fire
b) Spilled liquids: Aim the hose at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far edge until all the flames have been extinguished
c) Flowing liquid: Direct the hose at the base of the flames and sweep upwards until all the flames have been extinguished
d) Electrical equipment: Switch off the power (if safe to do so) and then direct the hose straight at the fire
4. Squeeze the lever slowly to begin discharging the extinguisher, as the fire starts to diminish carefully move closer to it
5. Ensure all the fire has been extinguished, re-ignition can be possible when a powder fire extinguisher has been used