Hammer Crusher is widely used in the world market nowadays, for primary crushing of hard rocks and block materials. The large and medium-size crushers are the key products of our company and stand in the front of the industry in the aspect of design and production.
Rock Hammer Crusher is widely used in mineral, quarry, building materials, road, railway, water conservancy and hydropower. The angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the affection of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
Rock Hammer Crusher has features like simple structure, large crushing ratio, high capacity, even particles, convenient maintenance, low production cost and so on.
The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft, when the movable jaw down, the angle between the fixed jaw and movable jaw gets smaller, and the materials can be crushed to reach the crushing target, when the movable jaw rises, the angle between the fixed jaw and movable jaw becomes larger, the movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
Main Technical Parameters
ModelMax. Feeding Size (mm)Discharge Size (mm)Capacity (t/h)Motor Power (kW)Overall Dimensions (mm)Weight (t)PE250x40020020-605-20151150x1275x12402.8PE400x60035040-10015-60301700x1732x16536.5PE500x75042550-10050-100552035x1921x200010.3PE600x90048065-16060-130752290x2206x237016.5PE750x106063080-14080-1801102620x2302x311029PE900x120075095-165140-2601103789x2826x302554.5PEX250x75021025-6010-40221667x1545x10205PEX250x100021025-6015-50301550x1964x13806.5PEX250x120021025-6020-60371560x2104x14157.7
Warranty
1. One Year (Calculated from the goods arrived the destination port.) If any parts (excluding easily damaging parts) are found defective in quality in the first year, we shall replace it free-of-cost. After one year, parts can be replaced on favorable payment basis. We can send our engineer to provide the installation and trial run in your place. But the relevant cost shall be bear in your account (round trip air ticket, board and lodging).
2. Our professional service includes: Free training, Guidance Installation and Debugging.
3. If you have any question, please contact us freely. Our after-sales service team on-line will do the best to accomplish your sincere requirement on time.
Kindly Note:
1. Please pay attention to the capacity. It's what you must take into consideration in choosing a suitable machine.
2. Please inform us the follow figures:
1).feeding material
2).Feeding material MAX. Size (mm)
3).Final mesh size (mm)
4).Capacity (t/h)
Upon we got your message we shall give you our favorable offer in short time.