China Engine Parts Cylinder Liner Used for Mitsubishi  4D32 Galoine Engine

Engine parts Cylinder liner used for MITSUBISHI 4D32 galoine engine
Features
· Special and excellent handling
· Popular new pattern and perfect appearance
· Accurate size
· High tensile strength
· Excellent wear resistance
· Long service life
· Sample will be offered to check our quality
· We passed CNAS; SON; SGS etc certificate
· 300,000 kilometers guarantee
1-26production lines and strong casting ability for cylinder liners;

2- Wet and dry cylinder liners;

3- Slip Fit (F), Press Fit (SF);

4- Their diameters can range from 55 to 250mm;

5- Oxidation phosphor reason and the plasma, laser hardening;

6- DIN/ISO4383 and ISO/TS16949 certificated;
Suzuki Cylinder Liner
Model: ST100A, ST100B, F5A, F6A, F10, F10A, L100, S10P, LJ80, FUTURA

ModelSpecificationprice(RMB)part numbercylinder numberMITSUBISHI 4DQ583*87*1621730607-503014MITSUBISHI 4D5590.1*94.1*164.519MD0504304MITSUBISHI 4D5690.1*94.1*16720MD1034648-94MITSUBISHI T120SS71*76*13011 4MITSUBISHI 4G41R75.5*80.5*12811 4MITSUBISHI 4D3099*104*19626ME0115134MITSUBISHI 4D3199*104*191.525.5MEO11604-64MITSUBISHI 4D34103*108*197.526.5MEO13366-74MITSUBISHI 4D32103*108*197.526.5MEO129004MITSUBISHI 4D32(New)103*107*19226MEO129004MITSUBISHI 4D35109*114*20028 4MITSUBISHI 4M4094*99*18625ME-2006804MITSUBISHI 4G5490*95*16523 4MITSUBISHI 4G6384*89*14518 4MITSUBISHI 4G6485.5*90.5*16020 4MITSUBISHI 4D33107*112*19727MEO133334MITSUBISHI 6D16 F/F118*122*20445MEO712246MITSUBISHI 6D16New F/F 118*122*20645MEO41105-76MITSUBISHI 6D14 F/F110*122*20650MEO316176MITSUBISHI 6D15F/F113*125*20652MEO710416MITSUBISHI 6D22F/F130*148*261.890MOE051500-36MITSUBISHI 8DC9F/F135*154*259.795MOE062602-48MITSUBISHI L10069*74*13512 4MITSUBISHI 4G3276*81*15013 4MITSUBISHI T120SS71*76*13011 4MITSUBISHI 4G3372*77*15015 4MITSUBISHI 4G92-S80*84.5*14516 4MITSUBISHI 6G7290*95*156.520 4MITSUBISHI 4G41R75.5*80.5*12813 4MITSUBISHI 4D6279.5*84.5*14514 4MITSUBISHI 4G6383*88*15016 4MITSUBISHI 4G5490*95*16520 4MITSUBISHI S6E93*98*16820.534407-003016MITSUBISHI S4E297*101*168.52134407-054004MITSUBISHI S4S/S6S93*98*19021 46MITSUBISHI S4K/S6K101*105*1962234307-0050146MITSUBISHI 4DR5/T21091*95*1762331607-022024MITSUBISHI 6DR591*95*1762331607-02101-26MITSUBISHI 4DR5 1/1691*96*17624 4MITSUBISHI 4DR5 1/891*95*17623 4MITSUBISHI 4DR5 3/3291*98.35*17625 4MITSUBISHI 4DR794*98*18625 4

1)Wet cylinder
The location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture). After the liner has been installed with the seat rings that belong to it.
(use slip agent), the cylinder diameter is to be checked particularly in the region of seal rings so as to determine whether any deformation has been caused by pinched sealing rings. Using the wrong sealing rings (wrong diameter/ wrong materials) can a narrowing of the cylinder which can lead to engine damage.The cooling system should be pressure tested after the liners have been installed so as to determine whether there is any leakage before the engine is started.
2)Semi-finished cylinder liner
The surface which supports the flange must be vertical to the location bore and it must be sufficiently and evenly beveled. If the liner flange is unevenly supported it can tear off. After the installation of the liner, which is only semi-finished in its inside diameter, this cylinder boring is finely bored and then finished by honing until it has the specified dimensions or, in the case of finely bored liner.It is only finished by honing (tolerance accordingly to DIN ISO H5). The surface of the liner must be flush to the sealing surface of the cylinder block, if necessary,the block surface and the liner must be finished by surface grinding.
3)Finished Cylinder liner
Before the liner is installed, the location bore in the cylinder block must be cleaned carefully and must be checked to ensure the accuracy of the dimensions and to determine whether any distortion has occurred. Out of center or damaged bores can be reworked for the installation of oversize liners. It is important for this that the locating bore is cylindrical, as this is what determines the geometrical shape of the inside of the pressed in, thin walled liner.
4)Air cooling cylinder liner
In accordance with the instructions from the engine manufacture, cast iron cylinders or light alloy cylinders are used.
Light alloy cylinders are separated into several groups due to the small installation clearance in the standard cylinder dimensions

FAQ
1. Are you a factory or a trading company?
Established in 1995s,Yucheng Huajin Cylinder Liner Factory is a professional manufacturer of cylinder liners for the automobiles and other vehicles.
2. Is OEM available?
Yes, OEM is available. We have professional designer to help your brand promotion.
3. Is the sample available?
Yes, samples are available for you to test the quality.
4. Are the products tested before shipping?
Yes, all of our cylinder sleeves / liners were inspected piece by piece and they are all qualified before shipping.
5. What's your quality guarantee?
Our cylinder sleeves / liners accord with GB/T 3177-2009, GB/T231.1-2009 standard.
We have 100% quality guarantee to customers. We will be responsible for any quality problem.
6. What's benefit will you bring?
Your clients will be satisfied wih the quality.
Your clients will continue orders.
You can get good reputation from your market and obtain more orders.
We continuously improve ourselves in quality and service to the market through an aggressive endeavor. We warmly welcome customers from at home and abroad to cooperate with us for common success.

Contact: Allen Gao
Phone : 86-18053402558

Web: www.sdqcpj.com
Yucheng Huajin Cylinder Liner Factory
Yucheng city,Shandong Province, China