China Environmental Climatic Constant Temperature Humidity Test Chamber

Environmental Climatic Constant Temperature Humidity Test Chamber

Introduction:
Temperature and humidity test chamber can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.
Application industry (not limited to the following)
1. electronic, electrical, mobile, data
2. communication, instrumentation, vehicle parts
3. Plastic products, metal, food
4. Chemistry, building materials, medical treatment
5. Space and other products to detect the quality of use
STANDARD FEATURES
(The table parameters for the company Standard Model parameters, we support customer customization parameters)

ItemSpecificationInternal dimension(W*D*H) 600*800*850mm External dimension(W*D*H) 1100*1370*1750mmTemperature range-70~+150ºCTemperature Accuracy±1ºCHumidity range20~98%R.H. (Refer Image below)Humidity accuracy±3%R.HCooling speed1ºC/min in average (without loading)Heating speed3ºC/min in average (without loading)Internal chamber materialSUS#304 stainless steel, mirror finishedExternal chamber materialStainless steel with paint sprayCooling methodAir coolingControllerKorea TEMI 880 controller
LCD touch screen, programmable control temperature and humidity
Can set different parameter for cyclic testInsulation material50mm high density rigid Polyurethane foamHeaterExplosion-proof type SUS#304 stainless steel fins radiator pipe heaterCompressorFrance Tecumseh compressorLightingHeat resistanceTemperature sensorPT-100 dry and wet bulb sensorObservation windowTempered glassTesting holeDiameter 50mm, for cable routingSafety protection deviceProtection for leakage
Over-temperature
Compressor overvoltage and overload
Heater short circuit
Water shortage

(The table parameters for the company Standard Model parameters, we support customer customization parameters)
2. Parameters
Inspect standard:JJF-1101,GB/T 10592,GB/T 10586
Testing standards:YD/T 2061,HB 7122.3,6783.7,GJB 5382.7,GJB 150,GB/T 2423,5170.2,5170.5,5179.2, ASTM E512,NF EN 60068-2-38,CNS 12565,12566,KS C0227,KS C022
Note: this tester can conform to but not limit to all the standards above, for more standards conformance, please contact us
ApplicationsTo simulate test environment with different temperature and humidityCyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operationUncover test unit weakness in a short-term test with accelerated time effect
Chamber design featuresHigh performance and quiet operation (68 dBA)Space-saving designed for flush installation to wallFull thermal break around doorframeOne 50mm diameter cable port o left, with flexible silicone plugDirect water supply connection for continuous operationAccurate wet/dry-bulb humidity measurement system for easy mantain

Range - 70 to 150°C

Temp/HumidityHD-E702-100-7HD-E702-150-7HD-E702-225-7 ModelHD-E702-408-7HD-E702-800-7HD-E702-1000-7Temp-onlyHD-E702-100T-7HD-E702-150T-7HD-E702-225T-7 ModelHD-E702-408T-7HD-E702-800T-7HD-E702-1000T-7Temperature Range:-70°C ~150°CCooling Capacity~ 2.5 kW at -50°C~ 3 kW at -50°C ~ 5 kW at -50°C ~ 6.5 kW at-50°C~ 8.5 kW at -50°C~ 9 kW at - -50°CHeating System~ 5 kW~ 5 kW~ 5.5 kW ~6.5 kW~ 8.5 kW~ 9 kWTemperature Fluctuation:±0.5°CTemperature Gradient:±0.5°C~±0.2°CHeating Rate†:≥3ºC / min average ( Advance model 5 - 15 ºC / min)Cooling Rate†:≥1ºC / min average (Advance model 5 - 15ºC / min)Humidity Range:10%~95%RH (Ref to Normal Humidity Range Diagramed)Humidity Fluctuation:±1.5%RH~±2.0%RHHumidity Gradient:±3%RHDimensionsWorkspace dimensions
(WxDxH)mm:500x400x500
HD-E702-100600x500x500
HD-E702-150750x500x600
HD-E702-225 850x650x800
HD-E702-4081000x1000x800
HD-E702-8001000x1000x1000
HD-E702-1000Exterior dimensions
(WxDxH)mm:1400x850x10501500x950x10501650x950x1150 1750x1050x13501900x1450x13501900x1450x1550Site RequirementsElectrical Supply:208V 3Ø 60Hz or 230V 3Ø 60Hz (customer specific)Humidity WaterDistilled waterCondensate Drain:1/2" hose connection (gravity drain)

Range - 40 to 150°C

Temp/HumidityHD-E702-100-4HD-E702-150-4HD-E702-225-4 HD-E702-408-4HD-E702-800-4HD-E702-1000-4Temp-onlyHD-E702-100T-4HD-E702-150T-4HD-E702-225T-4 HD-E702-408T-4HD-E702-800T-4HD-E702-1000T-4Temperature Range:-40°C ~150°CCooling Capacity~ 2 kW at -20°C~ 2.5 kW at -20°C ~ 4.5 kW at -20°C ~ 5.5 kW at-20°C~ 8 kW at -20°C~ 8.5 kW at - -20°CHeating System~ 5 kW~ 5 kW~ 5.5 kW ~6.5 kW~ 8.5 kW~ 9 kWTemperature Fluctuation:±0.5°CTemperature Gradient:±0.5°C~±0.2°CHeating Rate†:≥3ºC / min average ( Advance model 5 - 15 ºC / min)Cooling Rate†:≥1ºC / min average (Advance model 5 - 15ºC / min)Humidity Range:10%~95%RH (Ref to Normal Humidity Range Diagramed)Humidity Fluctuation:±1.5%RH~±2.0%RHHumidity Gradient:±3%RHDimensionsWorkspace dimensions
(WxDxH)mm:500x400x500
HD-E702-100600x500x500
HD-E702-150750x500x600
HD-E702-225 850x650x800
HD-E702-8001000x1000x800
HD-E702-8001000x1000x1000
HD-E702-1000Exterior dimensions
(WxDxH)mm:1400x850x10501500x950x10501650x950x1150 1750x1050x13501900x1450x13501900x1450x1550Site RequirementsElectrical Supply:208V 3Ø 60Hz or 230V 3Ø 60Hz (customer specific)Humidity WaterDistilled WaterCondensate Drain:1/2" hose connection (gravity drain)

The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.

3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

4.Good Packaging:

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

Please Send your inquiry Details in the below for our quotation,Click "Send" Now!