China Epoxy Polyester Electrostatic Spray Powder Coating for Electric Fan

epoxy polyester electrostatic spray powder coating for electric fan
Information:
Lead time:5-7 days
FOB port:Qingdao or Nanjing port,China
Tools for powder coating:electrostatic spray gun & oven
Our market:Europe 60%,North & South America 10%,Fast East 10%,Asia 5%,Africa 15%
Factory introduction:
Factory founded:year 1993
Factory located:Jinhu,China
Product lines:5
Production Capacity:500tons per month
Export time:from year 2008
Our group own two factories:one is in China,another one is in Ukraine
Quality test appliance for powder coating which we own:
Impact Impact Tester
Thickness Meter
Gloss Meters
Pencil Hardness Tester
Colorimeter
Adhesion tester
Particle Size Analyzer
Horse Boiling Furnace (Test high temperature resistance)
Resistance Tester
Coker
Water Bath Pot

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

PHYSICAL PROPERTIES

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 25 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

Mechanical property

Testing items

Standards and methods

Inspecting index

Impact strength

GB/T1732-1993, AS3715 2.8

>50kg/cm

Bending resistance

GB/T1185-88, AS1580 402.1, ISO9227

Pass 2-5 millimeters

Adhesion CHECKED TEST

GB/T9286-88,2mm Cross cut, ISO2409

Pass100/100, passes 0 levels

Cupdrawing:Erichsen, ISO1520

Erichsen, ISO1520

Pass 3-7 millimeters

Pencil hardness

GB/T6739-86, Mitsubishi

Pass H-2H

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91,500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

GB/T17740-79(89),1000 hours

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours

Without air bubbles, the surface without damage

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage

Uvioresistant

QUV-313,500 hours

Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of

2 hours

No bubble, not falling, losing light

We offer free samples to you.
Contact informatoin:
Danae Ren

You can check our picture of our sample panels as follows,