China Epoxy Sealing Primer for Concrete Epoxy Floor Paint Building Coating Liquid Coating Transparent light Yellow Brush spray Mixture

This two-component sealing primer is mainly prepared by epoxy resin and curing agent.

Instructions for use:

* Mixing ratio: paint: curing agent=2:1(by weight)

* Mixing method: Stir main paint well and then add curing agent,keep stirring until evenly.

* Pot life: 8h

* Substrate moisture content: ≤8%

* Relative humidity: ≤85%

*A gap of 28 days is necessary for newly constructed concrete floor before application of epoxy floor coating.

*Clear oil stains,old paint,water,dirt,etc. on substrate surface.To achieve better results,clean the floor with a vacuum thoroughly.

*Fill holes,cracks or caved or caved spots with epoxy slurry or putty,followed by drying and polishing.

*Avoid touching the eyes and skin.once the eyes are touched,rinse immediately with water and send to the hospital for treatment.

*Wear gloves,goggles and other protections during application.

*Avoid inhaling paint mist during application.

*Tools must be thoroughly cleaned before application.

Storage:

According to the regulations,this prodct should be stored in dry,cool,ventilated warehouse away from fire and heat.The package must be kept airtight and handled carefully.



Safety:

Read safety direction on package carefully.Operate this product in ventilated condition,avoid over inhaling paint miist or spills on skin or eyes.If any coating splashes on skin,rinse with proper detergent or soap water.If splash into eyes by accident,call emergence medical service immediately.

Shelf life:

Part A 12 months,Part B 6 months at 23 ℃