China Expanding Anchor Other Anchor

A hole to the size listed on the table for the anchor is augered in line with the guy and to a depth based on the rod length. The rod is secured to the anchor and lowered into the hole. An expanding-and-tamping tool is used to strike the top of the anchor and open the blades into undisturbed soil. The hole is filled and tamped.
Anchors: 3 type Expanding Anchor (Bust Anchor), 8 ways anchor, Cross Plate Anchor, Ground Anchor, Anchor Rod, Screw anchor, No Wrench Screw Anchor, etc.
* Surface finished: H.D.G or Black Paint
* The 8 Way Expanding Anchors are used for installation in holes augered by power drillers. One piece formed anchor with wings and a base. A retainer on the bottom holds the nut from the forged eye rod.
Anchor rod ordered separately.
* The item easy to use, dig small round hole earth, thus reduce workers hard work
* For Rod size: 5/8". 3/4", 1"
* Surface finished: by paint black, also can by hot dip galvanized
MORE HOLDING CAPACITY FOR LESS
Four different sizes are available with holding capacity as high as 40,000 pounds.
"Bust" Expanding Anchors expand to take full advantage of the available area. All eight blades wedge into undisturbed earth . . . there is no wasted space between blades.
This anchor should be installed in relatively dry and solid soils. The effectiveness of the anchor is dependent upon the thoroughness of backfill tamping.

Stock No.base Plate InchRod Diameter Inch Area Expand Top Plate Sq. Inch Approximate Shipping Weight Kg. /100Pcs Standard Pkg . Qty. /Carton G1630-06 6 5/8 64 231.005 G1630-07 7 5/8 92 310.00 5 G1630-08 8 5/8 135 390.00 5 G1634-08 8 3/4 135 435.00 5 G1631-08 81 135435.00 5

Cat.No. Anchor Hole Size In (mm)Area Sq. In. (sq cm) Rod Size In (mm) Std. Pkg./Pallet

6870*6 (152)70 (452)5/8 (15.8)12/28888135*8 (203)135 (871)5/8 (15.8)
or 3/4 (19.1)6/180108210 (254)200 (1290)1 (25.4)2/4810823410 (254)200 (1290)3/4 (19.1)2/48128312 (305)300 (1935)1-1/4 (31.7)2/361283112 (305)300 (1935)1 (25.4)2/36