China Extraction Condensing Steam Turbine Medium Pressure Steam Turbine

Product Details
Product NameExtraction Condensing Steam Turbine Medium Pressure Steam TurbineType of outputDC/AC Three Phase/AC Single PhaseGenerator typeDC Generator/ Synchronous GeneratorPower100KW-2000KW
A complete set of steam turbine island comprises of following equipments and sub-systems:
1.Turbine-generator set -
--power is generated through the action of generator driven by the turbine connected to it.
2.Water-condensation system
--steam is condensed to water to be circulated to boiler and heated again.
3.Vacuum system
A.sub-system of main steam (where steam circulates to propel the blades of turbine)
B.water cycle system (where water circulates from condenser to be heated again)
C.DCS system (monitors the operation of turbine and adjusts output rate)
D. deaerating &water supplying system (where oxygen is removed to ensure good operation environment and water is supplied)
4. Cooling Air system (for air-cooled unit only)
5. Generator system ( electricity is generated in this system)
Our protocol of delivering power plant construction project is as follow:
1.The Argumentation of Project
2. Engineering Design
a. Turbo-Gen Set and its auxiliary systems
b.Layout of Condensed Water System
c.Layout of Heat System
d.Civil Construction and Structure of Turbo-Gen Set
3.Equipment Purchase
a.Turbo Generator Set and its auxiliary systems
b.Condensed Water System
c.Vacuum System
d.Lower Temperature Heating System
4. Civil Construction
a.Foundation and the upper structure of the Turbo Generator House
b.Foundation of Turbo-Gen Set and its auxiliary systems
c.Foundation of other structures
5. Operation & Maintenance
a.Operation of power plant (technical counseling)
b.Regular maintenance and inspection
c.Technical Training Program for power plant personnel
d.General Overhaul
6. Installation & Testing
a.Installation & testing for all systems & equipment provided
b.Installation, testing & trail run of all systems of a power plant (Optional)
c.Installation, testing & trail run of entire power plant (Optional)
7. Supply of Spare Parts
Reference List
No.ItemProject detail01CommissionerLafargeHolcimCentury Paper MillPolatSPGCL02LocationGombe State, NigeriaLahore, PakistanTurkeyIndia03Scope of serviceEPC projectEngineering, Purchase, Supervision of constructionEPC projectEPC project04Applicationservice power plant
of a cement factoryservice power station of a paper millindependent power plantindependent power plant05Modelair-cooled condensing
turbine islandcondensing/extracting turbinecondensing turbinereheat turbine06BrandSimonsHTPHTPHTC07Standard of engineeringDIN.GBGBGB08Layoutsingle-story layout with horizontal steam dischargedownward steam dischargedownward steam dischargedownward steam discharge09Technical parameterspresure of steam inlet:8.5MP
tem. of steam inlet: 435C.
rated power:16.5MW
back pressure:15KPapresure of steam inlet:4.9MP
tem. of steam inlet: 475C.
rated power:18MW
pressure of extraction:1.1MP
flow of extracted steam:54.6Mpa
back pressure:15KPapresure of steam inlet:8.83MP
tem. of steam inlet: 435C.
rated power:51MW
back pressure:4.9KPapresure of steam inlet:16.7MP
tem. of steam inlet: 538C.
rated power:300MW
pressure of extraction:1.1MP
back pressure:10KPa10Performance (under standard condition)heat rate:2467kcal/kw
steam rate:4.16kg/kwheat rate:2206.5kcal/kwheat rate:2215.3kcal/kw
steam rate:4.16kg/kwsteam rate:3.64kg/kw