China Extrusion Blowing Molding Machine Containers

Extrusion Blowing Molding Machine Containers (PE / Bottles / Barrels / Kettles) - High Quality
Our PE Extrusion Blow Molding Machine can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
The 2L-16L double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of ZQD-2L,ZQD-5L,ZQD-10L and ZQD-16L. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 16L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production.
The 25-160L drums, tool boxes and auto parts series consists of ZQB-80,ZQB-90,ZQB-100 and ZQB-120 etc., which can be used for producing drums, tool boxes and hollow parts of all kinds. Materials of PE, PP, and ABS can be used. Maximum capacity of accumulator head can be 12L while volume of products can be 160L. Its control system adopts closed loop control imported from Europe and hydraulic system is pressure-flow double proportional control equipped with variable plunger pump to ensure fast and smooth operation of the machine and energy consumption of the hydraulic system can be reduced by 30% or above, saving considerable electricity.

Extrusion Blowing Molding Machine Containers (PE / Bottles / Barrels / Kettles) - High Quality,equipment information.

Specification
ZQD-2LZQD-5LZQD-10LZQD-16LMaterial
PE,PP^PE,PP^PE,PP^PE,PP^Max.container capacityL251016Number of die set1,2,3,41,2,3,41,2,3,41,2,3,4Output pcs/hr950x2750x2700x2600x2Machine Dimensionm2.7x2.0x2.53.4x2.2x2.63.9x2.3x34.9x4x3.1Total weightton46.59.510Accumulator head
ZQD-2LZQD-5LZQD-10LZQD-16LNumber of die heatingzone3334Power of die heating KW4.25.86-76-7Max die-pin diametermm6080140140Center distance of twin-diemm130160240260Center distance of tri-diemm85110160180Center distance of four-diemm6585120130Clamping Unit
ZQD-2LZQD-5LZQD-10LZQD-16LClamping forceKN3870110155platen opening strokemm135-370145-510230-600230-600platen size mm280x380320x390450x490500x490Max mould sizemm300x320350x370520x500600x500Mould thicknessmm135-210155-300235-380235-380Extruder Unit
ZQD-2LZQD-5LZQD-10LZQD-16LScrew diametermm60709090Screw L/D ratioL/D24:124:125:125:1Extruding VolumeKg/hr60-80100-120130-160130-160Number of heating zone zone3344Extruder heating power KW5-6.66-8.28.2-9.38.2-9.3Extruder driving powerKW15-18.522-3737-4537-45

Note: The specifications are subject to change without notice for the further improvement.
Note: Custom production accepted. Any client idea tried.