China F0 F2 F4 F6 F8 F10 Efr 80W 100W 130W 150W 180W Glass CO2 Laser Tube for Laser Cutting Machine

1. Feature:
1.1 High Power: Equiped with German discharge tube galvanized with a catalyst. This updated laser cutting machine replacement part has 30% more power than an ordinary laser tube of the same length, with a power up to 200W.
1.2 Reliable Stability: We carry out strict quality control during the firing process of the CO2 laser tube, and ensure them have a guaranteed reliability and stability.
1.3 Long Service Life: Due to the galvanized of catalyst inside and specially treated electrodes, the discharge tube has a better stability and long service life up to 6000 hours, ensure long term reliable operations.
2. Operation Condition:
2.1 Cooling method: Water Cooling.
2.2 Cooling liquid: Clean Water.
2.3 Flow rate: 3-5L/min. (F2 CO2 laser tube has the flow rate of 2-5L/min.)
2.4 Standard Water Temperature: 10-40ºC.
2.5 Ambient Temperature:2-40ºC.
2.6 Ambient Humidity: 10-60%
3. Operation Current
ModelInput Current (A)Max. Operating Current (mA)Max. Current in Long-Term OperationService LifeMatched EFR Power SupplyStarting VoltageF0822mA22mA and below20mA and below6000 hours (Operating current ≤ 20mA)T6014KVF022mA22mA and below20mA and below6000 hours (Operating current ≤ 20mA)T6016KVF228mA28mA and below25mA and below6000 hours (Operating current ≤ 25mA)ES80, F8019KVF430mA30mA and below28mA and below6000 hours (Operating current ≤ 28mA)ES100, F10024KVF630mA30mA and below28mA and below6000 hours (Operating current ≤ 28mA)ES150, F15028KVF830mA30mA and below28mA and below6000 hours (Operating current ≤ 28mA)ES150, F15030KVF1030mA30mA and below28mA and below6000 hours (Operating current ≤ 28mA)ES150, F15030KVThe above current should be in accordance with actual currents displayed on the ammeter, which is in a series connection with the cathode.
If used incorrectly for long period in over-current conditions, the CO2 laser tube 's negative electrode will change color, and the service life significantly decreased.
4. Technical Parmeters

5. Cleaning Tips: When cleaning the window of carbon dioxide laser tube, please do not use cotton swabs or other wipes as they will significantly affect out power.
The following methods are provided for cleaning the window:
4.1 When the lens is stained, turn off the laser tube.
4.2 Use an air dust blower to blow away dust and dirt on the lens.
4.3 Use a syringe to spray ethanol on the lens.
4.4 After the ethanol evaporates, turn the laser tube back on.
4.5 If the above method do not work effectively, professionals are required, who will use a cotton swab dipped in ethanol to clean the lens in a rotating fashion away from the center, outwards to the edge.
6. Special Notice:
5.1 Do not use acetone to clean the glass.
5.2 Do not move the two fastening screws on both ends of laser tube. Otherwise, the output power will decrease, and the laser tube will be scraped.
5.3 When testing the light spot on organic glass, please keep the organic glass 300mm away from the window.
7. Safety:
At the CO2 glass laser device generates invisible light, please wear eye protection gear when operating. A safety sign for high voltage is marked on the positive pole.
8. Storage and Transportation Requirement:
When storing and transporting the co2 laser tube, please drain the cooling liquid and cover the tubes ends with dustproof plastic bags. For storage, the required environmental temperature is 2-40 ºC and the humidity range from 10-60%.
Adhesive tapes and sponges should be used to fix the laser tubes and prevent sliding during transport. A 70mm sponge should be use at the end of the window, and a 50mm sponge should be at the end of the reflecting mirror fully.
9. Related Laser Machine Parts
9.1 Power Supply
9.2 Focus Lens
9.3 Reflective Mirrors
10. Contact Information


To be continued..