China F10018r55 Rubber Cover Plate Liner for 12 10f-Mr Pump

12/10 F-M Pump Nature Rubber Cover Plate Liner F10018-R55

Company Profile
ShiJiaZhuang Naipu Pump Co.,Ltd is the main factory of slurry pump , sand gravel pump , dredging pump and spare parts , with more than 30 years production experience .
we also can undertake OEM serive for casting and machning parts according the drawing or sample.
12/10 F-M Pump Nature Rubber Cover Plate Liner F10018-R55
Material can be metal , Rubber.
metal : A05 (Ultrachrome 27%Cr) , A07(15/3 Chrome /Moly Iron) ,A49(Ultrachome 28%Cr. Low C), A51(Ultrachome 36% Cr, Low C)
Rubber : R08(Standard Impeller Rubber) , R26(Standard Liner Rubber ), R55, R38, R33(Natural Rubber- Reinforced), S12 (Nitrile Rubber), S21(butyl Rubber), S42(Polychloroprene) ,S31(Hypalon)
Polyurethane : U01 (Wear Resistant Polyurethane)


Feature
Feature
Durable
High performance
Long lasting
Reasonable Price
frame Plate Liner Parts Code

Cover Plate LinerReplacement Slurry Pump ModelB10171.5/1B-AHRB150172/1.5B-AHRC20173/2C-AHRD30174/3C-AHRE4018R6/4D-AHR 6/4 E - AHR F6018R8/6 E-AHR 8/6 F - AHR G8018R10/8ST-AHRG1001812/10ST-AHRG1201814/12ST-AHRH1401816/14TU-AHR

Slurry Pump Impeller Picture

Main Slurry Pump parts
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , ThroatBush, frame Plate Liner Insert , Cover Plate , frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.
metal Material

CodeMaterial #Hardness
HRCPerformanceApplicationA05KmTBCr26≥56Ranks second only to A07 in abrasion-resistant performance; fair corrosion-resistant performance.High impact load abrasion condition; PH rate ranging from 5 to 12A07KmTBCr15Mo3≥59Best abrasion-resistant performance; corrosion-resistant performance is inferior to A05High impact load abrasion conditionA33 ≥35Abrasion-resistant performance is close to A03; fair corrosion-resistant performanceOxide slurry with PH rate no less than 1, like phosphor-gypsum in phosphate fertilizer plant, nitric acid, sulph-oacid and phosphoric acid, etc.A49 ≥43Fair abrasion-resistant performance, close to A03; fair corrosion-resistant performance in media with lower PH rate.Corrosion conditions with low PH rate, especially for flue gas and FGD devices for media of PH≥4; general suitable for lower acid condition.A12 ≥62Higher abrasion-resistant performance than A05; fair corrosion-resistant performance; suitable for media with PH rate is 6-16, where A05 is not suitable.High abrasive slurry with fine particles.A61 63-68Optimized abrasion-resistant performance than A12High abrasive slurry with fine particles.

Rubber Material

MaterialMaterial #ApplicationsNatural RubberR08R08 is low to medium hardness rubber used for impellers where slurry contains fine particles and erosive.Natural Rubber(soft)R26R26 is soft natural rubber used for liners where slurry contains fine particle and more erosive.Natural Rubber(soft)R33R33 is widely used for frame plate liners, cover plate liners and impellers. Maximal particle diameter is 10mm; impeller peripheral speed should be less than 25m/s; suitable for temperature not exceeding 75ºC.Natural RubberR55R55 is widely used for impellers, frame plate liners, cover plate liners and throat bushes. Maximal particle diameter can be 20mm, impeller peripheral speed should be less than 27.5m/s; suitable for temperature not exceeding 75ºC.EPDM RubberS01S01 is widely used for impellers, frame plate liners, cover plate liners and throat bushes. Maximal particle diameter can be 8mm; impeller peripheral speed should be less than 25m/s; suitable for temperature not exceeding 120ºC(continuous duty) or 140ºC(discontinuous duty).Nitrile Rubber(NBR)S12S12 is widely used for frame plate liners, cover plate liners, throat bushes, lip seals, impellers and expellers. Maximal particle diameter is 7mm; impeller peripheral speed should be less than 27m/s; suitable for temperature not exceeding 95ºC.Butyl RubberS21S21 is widely used for impellers, frame plate liners, cover plate liners, expellers, volute seals and throat bushes,. Maximal particle diameter can be 7mm; impeller peripheral speed should be less than 30m/s; suitable for temperature not exceeding 100ºC.HypalonS31S31 can be used for impellers, frame plate liners, cover plate liners and throat bushes,. It is recommended to use for strong acid slurry with mild or moderate corrosion. Maximal particle diameter can be 10mm; impeller peripheral speed should be less than 30m/s; suitable for temperature not exceeding 110ºC.

NaiPu WorkShop
We has own foundry workshop, Machining workshop, and Assembly workshop . As a result, Naipu Pump is able to ensure that clients save on costs.
Naipu Main Pump Model:

NAH seriesL(R) ,MHHSP(R)GAF Series1.5/1B-NAH(R)20A-L1.5/1 C-HH40PV-SP(R)6/4D-G2QV-AF2/1.5B-NAH(R)50B-L(R)3/2D-HH65QV-SP(R)8/6E-G3QV-AF3/2C-NAH(R)75C-L4/3E-HH100RV-SP(R)10/8F-G6SV-AF4/3C-NAH(R)100 D-L4/3X-HH150SV-SP(R)10/8S-G8SV-AF6/4D-NAH(R)150E-L6/4F-HH200SV-SP12/10G-G2AHF6/4E-NAH(R)300S-L6/4X-HH250TV-SP14/12G-G3AHF8/6E-NAH(R)10/8 R-M6S-H 14/12T-G4AHF8/6R-NAH(R)10/8 E-M8/6S-H 16/14 G-G6AHF10/8F-NAH(R)12/10F-M8/6X-H 16/14TU-GH 10/8X-NAH(R) 6S-HP 16/14H-GH 12/10ST-NAH(R) 8/6S-HP 18/16G-G 14/12ST-NAH(R) 8/6X-HP 18/16 TU-GH 16/14TU-NAH(R) 20/18G(TU)-NAH(R)

Our Services
1.Quick Reply.All Message or email will get reply within 8 hours
2.We can help to give some valuable suggestion.
3.We have a group of high quality technicians with rich experience who can solve everything during the whole process.
4.Perfect after -sales .We will be responsible for the whole life period
5.OEM order.Many material are available ,like High chrome, rubber , stainless steel and etc.,
Contact Us
Contact person : Katherine Hou


Disclaimer: Warman, Goulds and Metso and others are the brand names of the respected owners. Any use of competitor names, trademarks, model numbers or part numbers by NaiPu Pump are for reference purpose only and do not imply that any part or pump listed is the product of Weir Warman Pumps, ITT Goulds Pumps and Metso Pumps.