China FDA Approved OLED LCD Display Retail Blood Monitor Fingertip Pulse Oximeter

Product Basic Parameters
Display Type : OLED display
SpO2:Measurement range:70%~99%
Accuracy:±2% on the stage of 80%~99%
±3% on the stage of 70%~79%
Below 70% no requirement
Resolution:±1%
PR : Measurement range:330BPM~240BPM
Accuracy:±1BPM or ±1%(the larger one)
Power : two AAA 1.5V alkaline batteries
Power consumption: below 30mA
Automatic power-off : The product power off by itself when no finger is in the product for≥8 seconds
Finger Pulse Oximeter

}Features:

}1.A Battery life indicator

}2.In the absence of signals , the product would power-off automatically after 8 seconds

}3.Small,light in weight, and convenient to carry

Keys function description: In standby mode, start the key instrument into the working state, Touch this button under the working state can change the display mode.
Diagram of Operation Principle
Operation Environment:
Temperature:5ºC ~40ºC
Humidity:15%~80%
Atmosphericpressure:70kPa~106kPa
Transport, storage environment:
Temperature: -10ºC~55ºC
Humidity:≤ 95%
Atmospheric pressure: 50kPa ~ 106kPa,non-corrosive gas and well-ventilated environment

Operation Instructions

}1.Install a pair of AAA batteries into the battery compartment.

}2.Plug a finger into a rubber hole of the Oximter.

}3.Press button on the front panel to start.

}4.Do not shake your finger or move your body when the Oximeter is working

}5.Press the button if you want to change display direction

}6.Read the relevant value from the display screen

}7.The device will automatically power off in 8 seconds if there is no finger signal.
Retail Packaging Size
Product Size : 95mm*62mm*38mm
Net Weight :≈ 48.3g (without batteries)

Packaging Information
Carton Total Weight: ≈ 5.5kg(Gross Weight)
PCS/Carton : 100 PCS
Carton Size: 475mm*210mm*275mm, ≈0.028CBM
MOQ:100 PCS

}