China FRP Solas Rescue Boat with CCS BV ABS Approved

FRP SOLAS Rescue Boat With CCS BV ABS Approved

Marine Rescue Boat Overview:
The rescue boat is fitted with oil-resistant foam fender with fastening rubber outside.
The handrails are arranged for each side of the boat for passenger embarkation.
The self-bailing deck design makes quick water exhaust.
The self-righting device is installed for fast rescue boat,
which meet with requirement for use on board the RORO vessel.LSA code and MSC/CIR 809 regulation.

The Rescue boat and Fast rescue boat are almost similar in terms of operation but the later will have few additional/different requirements. As per SOLAS,

Rescue Boat Different Construction:

GRP rescue boats may be either of rigid or inflated construction or a combination of both and shall not be less than 3,8 m and not more than 8,5 m in length.

Fast rescue boats shall have a hull length of not less than 6,0 m and not more than 8,5 m, including inflated structures or fixed fenders.

Rescue Boat Different Speed:

Using its driving power the rescue boat and solas fast rescue boat has to reach the following speeds

Rescue Boat: Manoeuvring speed of at least 6 kn and maintaining that speed for a period of at least 4 hours.

Fast Rescue Boat: Manoeuvring at a speed of at least 20 kn in calm water with a crew of 3 persons and maintaining that speed for at least 4 hours. A speed of at least 8 kn with a full complement of persons and equipment.

High speed rescue boat widely use in Ocean ,reiver ,lake etc .Some clients us the rescue boat with diesel engine as for the fishing boat or sightseeing trip too .

Nowadays .We supply many type capacity emergency rescue boats .Such as 6 persons rescue boat ,12persons rescue boat etc .Different capacity with different prices and working performances .All of them are approved by SOLAS standard .

Technical Parameters of FRP SOLAS Rescue Boat