China Fabric Checking Machine Fabric Inspection Frame Fabric Measuring Machine

Suntech Knitted Fabric Inspection Cutting Machine

SUNTECH Knitted Fabric Inspection Machine with optional data collection and analysis system(4-point system) to handle a wide range of fabrics, from tension-sensitive elastomeric and lycra fabrics to stable woven, technical and upholstery materials.

This machine can be supplied to operate from plait/loose fabrics to roll, or with various otherfabric inlet or outlet options.
ModelST-KFIM Open Width Knitted Fabric Inspection MachineFabric Width1800mm-4000mmSpeed5-54m/minStandard Roll Diameter500mmDimention(L*W*H)3300x3100x2000mm(for model ST-KFIM-260 only)Weight1550kgs(for model ST-KFIM-260 only)Electric Specs3Phase-380V; 50Hz(can be adjusted to suit for different countries)RemarkVariable working width is possible and can be tailor-made to your requirements of processing needs.
Features :*Active Unwinding - tension control
Twin unwinding rollers are driven by motor, help fabric roll active unwinding. To avoid damage or tension caused by passive pull.*Fabric End Stop Sensor >> -efficiency
It will allow for continuous fabric inspection, from one piece of roll to next, no need to feed fabric again.*Dancing Roller - tension control
It will move up and down to control tension, ensuring speeds of feeding, inspecting and re-winding synchronized.*Full Width Fabric Inspection >> -tension control
60 degree fixed angle inspection screen which has been verified thousand times with the least influence for fabric tension. It is the most suitable angle for knitted fabric.*Scroll Roller - curled edge control

03 sets of Scroll Roller &01 set of Air-blowing device

1. Before inspection table, the scroll roller will make fabric open totally when inspection.
2. After inspection, the scroll roller will open fabric curled edges again to make sure a accurate edge-align.
3. Before rewinding, the scroll roller & Air-blowing device will once more open fabric and eliminate crease for perfect roll generation.*Digital Counter Meter

- Unit Meter(M) and Yard(YD) optional

- Error less than 0.1m/km

- Pre-set length available

*Edge-alignment Sensor
align the fabric edges accurately. When fabric declines, the rewinding station will move left or right for aligning.*Twin Rewinding Roller
Consistent roll output by actively surface rewinding with twin rubber-covered roller.
The roll compact could be adjust due to different ratio of the rollers. You could adjust the roll hardness (Loose or Tight) through the hand-wheel.
Excellent Features of SUNTECH Garment Defects Fabric Inspection Method

1) Low Tension Fabric Delivery and Speed SynchronizationUnique mechanical and electric device combination for making fabric feeding, delivering and re-winding Non Woven Bag synchronous.

2) Full Width Fabric Inspection- with 45 Degree Fixed Angle Inspection Screen Fabric can bechecked under the aid of different viewing and lighting options.

3) Accurate Fabric Length and Optional Weighing Machine.Fabric roll length and weight can betaken by industrial standard measuring systems with digital readouts to give consistent fabric rollassessments.

4) Stretch Fabric Control - with Scroll Roller System and De-curling System.Fabric controlled from input to electro/ pneumatic edge guilding system for perfect roll generation.

5) Consistent Roll Output- with Twin RewindGeographic Surveying Instrument ing Roller and Roll Hardness Adjustment Processedrolls are rewound with the minimum amount of tension and are consistent from roll to roll.

6) Versatile Fabric Input and Output Options- Synchronize with Other Production OperationsOptional systems are available for different fabric input and output presentations, roll to roll, continuous fabric input and plait input and output.

7) Pneumatic Roll Ejection Device- Optional Heavy produced rolls can be pushed by the pneumaticcylinder arms so as to save labour power.

8) Data Collection and Analysis System ( 4-point System)- Optional 100% fabric inspection withsoftware for accurate fabric roll analysis and printout.

9) Automatic Linear Cut ( Fabric Roll End Cutter)- Optional Full width cutting at the end ofprocessed roll, fast and accurate.

about usSUNTECH is one of the leading designers & manufacturers on textile machines for weaving & finishing units, especially for Fabric Make-up Machines and Material Storage & Handling Equipment.Over 40 years experience, SUNTECH now has its brand office in HK and International sales office in Hangzhou. In addition, our factory is located in Ningbo city, Zhejiang, China.Today,with more than 2500 customers and 6000 installations around the world, SUNTECH now has its agent network in Italy, Germany, Russia, Argentina, Colombia, Peru, Ecuador, Guatemala, Indonesia, Thailand, Philippines, India, Pakistan, Bangladesh, Sri Lanka, Uzbekistan, Iran,Egypt, South Africa, Syria, Mauritius, etc.
Our clients
Our service
Contact us
FAQQ1: Is the machine have length counting? In Meter or Yard or Inch?
A1: Yes, Digital Counter Meter is installed on the machine which gives Meter counting or Yard counting.
The desired length also could be pre-set on the digital counter meter. When arrives at pre-set length, machine stops automatically.
Q2: How to feed fabric onto machine? Easy?
A2: Machine layout and drawing of feeding course will be supplied along with machine.
Q3: What is the electrical specs? Can it be used directly in my country?
A3: 3 phase, 380v and 50hz(can be adjusted to suit for different countries)
Q4: Is the control panel in English?
A4: Yes, English version for control panel and relevant operation manuals.
Q5: How long is the warranty? If any problems, how you solve it?
A5: 13 months from the date of shipment. Package & Printing Service If any quality problems within warranty, Suntech will responsible for it, and send new replacement free of charge.Recycling Machine
Q6: Can we install it by ourselves? Overseas engineer is available?
A6: The machine will be shipped Circuit Board under assembled base, no need to install again.