China Fabric Film Simple Spreading Machine for Woven Knit Fabric

China Fabric Film Simple Spreading Machine for Woven Knit Fabric
Feature
1.PLC touch screen, make the spreading easier.
2.We provide the OEM service and could meet customers' needs.
3.Our 90% parts are imported, our machine's stability is high.
4.It has 4 distribution systems, it could avoid the big tension.
5.The spreading effect is the best if the table length is 18m. The longer of the table, the better of the spreading result.
Optional Components:
CT-3I/3II/3III/3IV
STANDARD LAMINATED CUTTING TABLE
FeaturesModules design is easy for assembling,disassemble and transport,and can be freely lengthened or shortened.The table board used E1-level multi-layer plywood,adhered with laminate surface,which is smooth,never deforms and has a long working life.The stand is made of cold-rolled steel plate of 1.5-3mm thickness and the height can be adjusted.The users can choose from the stainless steel handings of 2.0-3.0mm,which can be used to match the cloth spreading machines and automated cutters of various brand.The machine can spread the cloths while cutting,greatly improving the efficiencyIt can be used for various brand of auto cloth spreading machines home and abroad.
CT-3I/3II/3III/3IV
AIR FLOATION LAMINATED CUTTING TABLE
Application
It uses the imported laminate plywood,which is smooth,firm and wear resistant,while not easy to deform but suitable for cutting application
It is equipped with blow-and-suction bi-direction air pump,which makes the cloths move easily,reduce the tension and easy to cut,thus improving the efficiency.
It is equipped with two-side stainless steel banding,which can be matched with the various brands of the cloth spreading machines and automated cutter.


Specification

ModelLD-190Power1.5KWVoltage220V/50HzApplicationKnit fabric and Woven FabricCloth Width2.1m,about 6.9 feetMax diameter of fabricroll0.45m, about 1.48 feetWeight of fabric rollMax 80kgTravel SpeedMax 86m/minLay HeightOne-way: 220mm
Face to Face: 150mmWidth of Table2.33m, about 7.64 feetLength of Table1.2m/piece, about 3.94 feet/piece

Our Service
*Installation and Debugging of Software and Hardware
We provide installation and debugging services for respective software and hardware as well as system debugging and initialization.
*System Application Training
We provide relevant training service (installation and debugging of software and hardware, process operation and report application, etc.) according to actual need of the customer.
*Product Maintenance
We provide technical support and maintenance as to problems and requirements with use and application scope of all relevant products.
*Hardware Maintenance
We provide testing and debugging as well as repair services for hardware equipment provided by XIDO .
*Requirements Development
The customer can make requests in writing for software customization (including report customization, improvement of function, special function-specific requirements, etc.), and Party B will charge Party A certain fees according to difficulty.