China Face Mask Machine Parts Mask Maker Making Machine

face mask machine parts mask maker making machine
Equipment introduced: the plane went on two face mask machine is a mask body machine connected to a bypass machine, through the bypass machine and ear belt connected machines, when the machine starts mask body machine to produce the product by the conveyor belt conveyor to bypass machine, after in the transmission of masks to ear by the shunt machine belt welding machine for ear part of welding in order to achieve a full face mask finished products, the whole process to realize fully automated production process, does not need manual operation, namely a body machine connected to two ear machine, output can reach 100-120 pieces per minute.
Mask machine parameters
Number
Name
Parameter
Note
1
Name
Plane one - tow inner - ear mask machine
2
Model
3
Ultrasonic system
15/20KHz
4
Power
9Kw
5
air pressure
6Kg/cm³
6
efficiency
100-120pcs/min
7
Power
50/60Hz Ac220V
8
Weight
1700Kg
9
Size
6500x3600x2000mm
Machine parameters:
product model:
driving mode: servo motor and stepping motor
PLC servo: Taiwan delta
machine voltage: single-phase 220V
machine size:6500 * 3600mm * 2000mm
man-machine interface: Taiwan delta
control panel: man-machine interface (touch screen) and button
machine frequency: 50HZ
Material used: PP non-woven composite fiber
Machine cylinder: Taiwan yadek
Ultrasonic system: 15-20 KHZ
Product specification: standard model 175*95mm special model 180*95mm 145*90mm 125*90mm
Machine capacity: 100-120 tablets/min
Note: it can be connected to two ear tape machines for production
Mask Machine Product advantages:
1 full automatic output, mask ontology has ears machine to automatically, reduce the labor costs, reduce interference May
2. The ear band machine does not need to wait for work, and the adaptive interactive processing system can comprehensively improve the productivity
3. Built-in anti-deformation and anti-displacement device, to ensure stability and reliability, all-weather 100% qualified input
4. Preset quantitative integrated output, neatly stacked, never scattered, hygienic and reliable
5. From the production mask ontology to meet bridge of the nose, ears with soluble ears with spot welding, fully automated, a molding, do not need any artificial operation:
6. The size of the nose bridge strip and the size of the body can be configured according to the drawings provided by the customer.
7. Face mask folding can be adjusted according to their own needs
8. The machine adopts computer programmed control and photoelectric detection, which improves the stability of the machine and reduces the failure rate of the machine
9. The machine adopts frequency conversion control to accurately control the production efficiency and production speed. Users can also adjust the production speed according to their own actual situation.
10. Compared with semi-automatic equipment, this set of equipment has higher efficiency, humanized design and convenient operation, which solves the problems of low working efficiency, difficult recruitment and high wages of workers in mask manufacturing enterprises.
11. From the production of the mask itself to the welding of the bridge of the nose and the spot welding of the ear strap, the product packaging is completely automated and can be completed in one time without any manual work
12. The size and length of the nose bar can be configured according to customer requirements;
13. Feeding system: the machine adopts aluminum alloy structure, beautiful and strong, automatic feeding system, setting of tensioning degree, adjusting the tensioning degree of the cloth, thus effectively ensuring the beauty and flatness of the finished product;
14. The folding position of the mask can be adjusted freely according to requirements, with accurate positioning and no displacement
15. Control system:
(1) computer programmed control photoelectric detection device, high stability, low failure rate
(2) automatic counting, can accurately control the production efficiency and production speed;
(3) variable frequency control, the user can adjust the production speed according to the actual needs;
(4) rotary control box, the user can adjust the operation direction according to the actual needs
(5) discharge system: photoelectric induction, automatic electrostatic removal device, automatic product receiving device
Welding principle: by means of air compressor to provide air power into the cylinder for a linear reciprocating motion of gas and raising the pressure in compressor cylinder piston compression air supply from one side of the piston can produce pressure, air pressure forces the pistons to generate thrust, through the titanium alloy welding head with two ultrasonic welding head surface rubbing against each other (high frequency vibration of tens of thousands of times per second) to form a fusion between the molecular layer
Material: imported cylinder, imported servo motor, stepping motor, ultrasonic, man-machine interface (touch screen), aluminum alloy structure, photoelectric testing raw materials, high quality steel and aluminum fine material, through CNC precision processing, beautiful appearance, no rust, more durable.
Components: the main part of the equipment adopted imported cylinder, imported servo motor, import stepper motor, the ultrasonic, photoelectric detection of raw materials, aluminum alloy structure, high-quality steel aluminium concentrate after 1020 hours, three thousand multiprogramming, assembled, ensure customers in the use of equipment in the process of high stability, low failure rate, each to the assembly program after repeated test assembled
Equipment composition: the main body of mask machine (1 set), the connection line of mask (1 set) and the outer ear belt machine of mask (2 sets) constitute the production line of full-automatic disposable three-layer mask machine
Face mask machine: unwinding - ultrasonic compound - bridge of nose - prepress compound - folding - prepress compound - ultrasonic compound - roll cutting


Plane mask production process
1) stack the three layers of non-woven materials together through the machine
2) roll the hem and put the nose in
3) a large piece of non-woven cloth is gradually narrowed from left to right along the inclined plane to make a "folding structure".
4) pressing: press and flatten the surface of the mask
5) automatic single cutting and seaming of the mask
6) re-use non-woven cloth, and repair the edge of the mask
7) cutting and trimming again
8) through the way of hot pressing, fixed hanging ear rope
9) finally pass quality inspection, sterilize and package the finished productContact Us
Want to know more about machine price and technolgy data, video , picture. Can through Email or Whatsapp/wechat. Within 2 hours send to you on working days.
Carl Tao
(oversea marketing manager)
Mobile:+86 18660802995
Contact us to get more details about face mask machine parts mask maker making machine