China Face Mask in Stock for Sale

Introduction of N95 maskPackage & Conveyance
The N95 mask is one of nine particulate protective masks certified by NIOSH. "N" means not resistant to oil. "95" indicates that the particle concentration in the mask is Lifting Equipment more than 95% lower than that of the particles outside the mask when exposed to the specified number of special test particles. The 95% value is not the average value, but the minimum value. N95 is not a specific product name, as long as it meets the N95 standard and passes the NIOSH review, it can be called "N95 mask". The protection level is N95, which means that under the detection conditions specified by the NIOSH standard, the filtering efficiency of the mask filter material for non-oily particulate matter (such as dust, acid mist, paint mist, microorganisms, etc.) reaches 95%.
The N95 mask is one of nine particulate protective masks certified by NIOSH. "N" means not resistant to oil. "95" indicates that the particle concentration in the mask is more than 95% lower than that of the particles outside the mask when exposed to the specified number of special test particles. The 95% value is not the average value, but the minimum value. N95 is not a specific product name, as long as it meets the N95 standard and passes the NIOSH review, it can be called "N95 mask". The protection level is N95, which means that under the detection conditions specified by the NIOSH standard, the filtering efficiency of the mask filter material for non-oily particulate matter (such as dust, acid mist, paint mist, microorganisms, etc.) reaches 95%.

Materialpp nonwoven, soft cotton, melt blown filterColorwhitespcvalveStyleheadband / earloopFunctionprevent flu / anti somke / dustCertificationN95/CEMOQ5000 pcsPacking50pcs/box , 600pcs/ctn

Function and use
The N95 mask has a filtration efficiency of more than 95% for particles with an aerodynamic diameter of 0.075µm ± 0.02µm. The aerodynamic diameter of air bacteria and fungal spores mainly varies between 0.7-10µm, and it is also within the protective range of N95 masks. Therefore, N95 masks can be used for respiratory protection of certain particulates, such as dust generated during grinding, cleaning and processing of minerals, flour and certain other materials. It is also suitable for liquid or non-oily non-production caused by spraying. Hazardous volatile gas particles. Can effectively filter and purify the inhaled abnormal odors (except toxic gases), help reduce the exposure level of certain inhalable microbial particulates (such as mold, anthrax, tuberculosis, etc.), but cannot eliminate contact infection, illness or death risks of.
Precautions for use
1. Wash your hands before wearing a mask, or avoid touching your face with the inside of the mask during wearing the mask to reduce the possibility of the mask bColor Card & Color Comparator eing contaminated.
2. Distinguish the inside and outside of the mask, and up and down.
3. Do not squeeze the mask with your hands. The N95 mask can only isolate the virus on the surface of the mask. If you squeeze the mask with your hands, the virus will wet the mask with the droplets, which will easily cause virus infection.
4. Try to make the mask fit tightly to the face. The simple test method is: after putting on the mask, exhale hard, and air cannot leak out from the edge of the mask.
5. The protective mask must be close to the user's face. The user must shave his beard to ensure that the mask can fit on the face. The beard and anything placed between the mask seal and the face will cause the mask to leak.
6. After adjusting the position of the mask according to your face shape, apply forefingers with both hands to press the nose clip along the upper edge of the mask to make it close to the face.
7. Masks should be replaced in time when:
8. When the respiratory impedance increases significTag Gun antly;
9. When the mask is damaged or damaged;
10. When the mask cannot be tightly attached to the face;
11. Masks are contaminated (for example, when stained with foreign mattLCD Module er such as blood or droplets);
12. Masks have been contaminated (have been used in individual wards or patient contacts);
13. If it is a mask containing activated carbon, and there is an odor in the mask;
14. Masks have been used longer than recommended.
Other Hot products

Contact us: