China Factory Direct Sell Refrigerator Condensor with Best Price

Product Description
Raw material:
1) Rolling welded steel tube: Ø4.76~Ø6.35x0.71,
2) Low carbon steel wire O.D1.4~1.6mm
3) Bracket: steel plate(SPCC) thickness 0.6~2.0
Structure:
1) Flat type of wire on tube condenser used at the back;
2) Bended or spiral type of wire on tube condenser used at the bottom;
3)Wrapped type of tube embed on plate
Technical Standards:
Wire pitch ≥5
Can produce according to the drawing or sample supplied by clients, also can help the clients design and produce different condensers.
Performance:
(1) Surface with electrophoresis coating to prevent the corrosion.
(2) Inner cleanness can meet requirement of R134a & CFC cooling system
(3)Can satisfy the cooling capability requirements.
Production capacity:
15000pcs/day, at least 3.5million pcs yearly.

R134a Cooling System Tube Inside standardsSpecilication of coatingResidual moisture ≤5mg/100cm3 Residual impurity ≤10mg/100cm3 Residual mineral oil ≤100mg/100cm3Residual chlorine ≤5vloppmResidual paraffin ≤3mg/m2Biggest single impurity ≤0.5mmCoating thickness
1) thickness of Anodic electrophoresis coating 18~22μm;
2) thickness of cathodic electrophoresis coating 15~20μm;
3) thickness of wire-tube evaporator powder coating: 60~300μm
Hardness of coating: ≥2H
Impact of coating: 50cm·kg/cm impact, no crack
Adhesion of coating: ≥two grade
Flexibility of coating: Around R=3D bend 180°, no crack or no fall off Color tolerance of powder painting E≤1.5
Corrosion resistant (Salt spray GB2423)
1) Anodic electrophoresis coating ≥150h;
2) Cathodic electrophoresis coating ≥48h;

warmly welcome to contact me!