China Factory Direct Selling FTTH Fiber Optic Fusion Splicer

Obtaining 16 patens of invention and 58 technical innovations, a brand-new product-YR6481Optical Fiber Fusion Splicer is launched, thanks to 5 years of painstaking research of 28 engineers.
Main characteristics

Small and light
Small in size and light in weight, the splicer is easy to carry and can be lift by one hand.

Water-resistant, dust-resistant and shock-resistant in design
Water-resistant and dust-resistant can meet IP52 requirements.
All-in-one fixer
The all-in-one fixture meet fusion splicing demands of multiple fibers, jumpers and rubber-insulted wires with a cladding diameter of 80~150μm.
Graphical interfaces and touch screen
YR6481uses entirely new GUI graphical interfaces and touch screen in design. Operators can set up the splicer and get to know relevant information of it simply and directly by graphical interfaces.

Intelligent heat shrinkage
A detection unit is embedded in the heater. The heating function will only be enabled when the thermal shrinkage tube is put in the heater, to avoid misoperation.

Large-capacity pluggable lithium battery
The built-in pluggable lithium battery with large capacity can answer working demand lasting all day long (typical 220 times of fusion splicing and heating cycles).

Ceramic V-block and ceramic presser foot
Ceramic V-block with high precision brings you convenient and accurate placement of optical fibers and makes cleanup easy.
Technical data:

Model

YR6481

AV6481B

Alignment method

Precise core alignment and cladding alignment

Applicable fibers

Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements ofITU-TG.651~653, ITU-TG.655 and ITU-TG.657.

Optical fiber diameter

Cladding:80~150μm, coating layer: 0.1~3mm

Cutting length

5~16mm(coated optical fiber diameter≤250μm);10mm(coated optical fiber diameter:0.25~3mm)

Fusion splicingconsumption(typical value)

0.02dB(SMF);0.01dB(MMF);0.04dB(DSF);0.04dB(NZDSF)

Return loss

Better than 60dB

Fusion splicing time (typical value)

7s

Heating time (typicalvalue)

18s

Pulling force test

1.96~2.25N

Thermal shrinkage tube

60mm, 40mm and a series of thermal shrinkage tubes

Graphical display

High-performance 4.3 inch LCD

Magnification time

320 times/88 times

Fusion splicing record

10000 groups

Battery capacity

11.1V,6800mAh,typical value of fusion splicing and thermal cycle is 220times

Battery service life

Cycle charging times reach 300~500, can be replaced by customers

Electrode service life

Typical value is 4000 times, can be replaced by customers

Construction lighting

Built-in lights with high-brightness and wide lighting area

Working environment

Temp:-10~50ºC;hum: 0~95%RH,height above sea level:0~6000m

Operation interfaces

GUI graphical operation interfaces

External power

AC: AC100~240V,60Hz,0~1.5A;DC: DC10~15V

External port

USB / SD

Dimensions

120mm(W)x130mm(H)x154mm(D)(without rubber anti-vibration pad)

Weight

1.59kg(host engine),0.37kg(battery)