China Factory Direct Supply Industrial Dual Thermostat for Electrical Control Cabinet Rzr 011 Temper

Feature:
1.NO and NC in one casing
2.Separate adjustable temperatures
3.Clip fixing
4.Simple to mount
5.High switching capacity
Two thermostats in one casing:
Thermostat (contact breaker, normally closed) for regulating heaters.
Thermostat (contact maker, normally open) for regulating filter fans and heat exchangers or switching signal devices when temperature limit has been exceeded.
Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.

Technical Data Switch temperature difference 7K (± 4K tolerance) Sensor element thermostatic bimetalContact type snap-action contact Contact resistance <10mΩService life > 100, 000 cycles Max. Switching capacity 250vAC,10(2)A,120VAC,15(2)A,DC 30WEMC acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3Connection 4-pole terminal, clamping torque 0.5Nm max
rigid wire 2.5mm²
stranded wire (with wire end ferrule) 1.5mm²Mounting clip for 35mm DIN rail, EN50022(or for exit filter EF 118 Series)Casing plastic according to UL94 V-0, light grey Dimensions 67*50*46mmFitting positionvariable Operating / Storage temperature -45 to +80ºC(-49 to+176ºF)Protection type IP20 Art.No.Setting rangeSetting rangeWeight RZR 011 72.0-00contact breaker,NC 0 to 60ºC contact maker,NO0 to 60ºC 90gRZR 011 75.0-00contact breaker,NC -10 to +50ºC contact maker,NO +20 to +80ºC 90gRZR 011 75.1-00contact breaker,NC -10 to +50ºC contact maker, NO -10 to +50ºC 90gRZR 011 72.0-01contact breaker,NC +32 to +140ºFcontact maker, NO +32 to +140ºF90gRZR 011 75.0-01contact maker,NO +14 to +122ºFcontact maker,NO +68 to +176ºF90g

Need any special customization, please contact us!
Technical drawing: