China Factory Price Fiberglass Polyester Splint for Fracture

The Introduction of Roll Splint :

Applied to the affected part in case of occurrent injuries in bone or ligament muscle by traffic accident or exercise ,

climbing etc. To overcome the shortcomings of traditional plaster.

Splint consists of fiberglass or polyester fiber or nonwoven polyester of multilayer soaked and coating

polyurethane and the inner and outer protective layer cloth. It was divided into piece type and roll type .

It is easier to use without wearing gloves and can be removed by ordinary scissors .Roll type is more economical.

Features:

1.Different Specifications

2.Cut on demand

3.More economic

4.Easily to remove

Operation:

1.Select a suitable model according to the injured area , immediately use special sealing clip seal the end of splint after cut the suitable length

2.Soak the whole set into lukewarm water(21-24°C) for 4-6 seconds meanwhile squeeze it 2-3 times in water to increase the area with the water .

3.Wipe out excess water on both sides with dry cloth

4.Attach the inside fabric cloth to affected area and apply the elastic bandage around splint to fix.

5.According to actual need to have a molding process.

6.It will take 3 minutes to get hard and after 30 minutes,it can bear weight .

Notes:

1..Ensure roll-type splint sealed after cutting .

2.Confirm whether it become hard before use, it isn't used when it become hard

3.If the problem of the quality are found, please contact with the manufacturer or distributor immediately.

Kangda Splint TM/Fiberglass & Polyester& SW

Type

Model

Specification

Rolls/Box

kangda roll splint

SF/SP/SW002

5cmx4.5m

1

SF/SP/SW003

7.5cmx4.5m

1

SF/SP/SW004

10cmx4.5m

1

SF/SP/SW005

12.5cmx4.5m

1

SF/SP/SW006

15cmx4.5m

1