China Factory Solar Panel System Solar Products Solar PV Energy Tracking System Aluminum Rail Mounting Bracket Stent for Ground Carport FarmlFishlRoof

-Test method: GB/T10125-2012

-Sample placement: 15°~25° with vertical direction

-Settlement salt solution concentration: (50+/-5) g/l NaCl

-Temperature inside the test chamber: (35+/-2) ºC

-Settlement rate of salt spray: 1~2ml (80cm2.h)

-Settlement salt solution pH value (25ºC+/-2ºC): 6.5~7.2

-Exposure time: 720 hours (check once every 96 hours)

-Cleaning method: natural dry for 0.5~1.0 hours, then rinse with water of temperature not higher than 40ºC, then dry immediately.
Design parameters

-Basic wind pressure: 0.35kN/m2;

-Basic snow pressure:0.55kN/m2

-Regional limit maximum wind speed: 23.8m/s

-Stent spacing for base plate :3000mm;
-Stents Angle: 22 degree

DescriptionGround mountingRoof bracketCarportAgricultural bracketSingle column standField statusopen areaMax wind load≤60m/s/<46m/s<46m/s≤46m/sHeightDependingSnow loadDependingTilt Angle 0~45°As per requirement0~45°0~30°0~45°Mount DirectionsVertical,horizontalStandardGB/T2518-2008 & GB/T10125-2012Body materialS550GD+Z350Bolt materialSUS304base materialQ235/CementSurface treatmentGalvanized mg-alWarranty30 years life.

Project reference
Factory tour
1. Workshop - 3 Light steel production lines (Monthly capacity: 200MW)
2. Workshop - 7 PC production lines
3. Light gauge frame steel
Why choose us for your solar system PV mounting brackets?
-Super anti-rusting performance
-High precision of structure material
-Save raw material, and cost 20%
-200MW monthly production capacipty, ensures short lead production time
-Perfect finish of structure material, hence the nice solar mounting effect
Products application gallary